XRT7250 datasheet(338/463 Pages) EXAR

338 / 463 page

áç

XRT7250

DS3/E3 FRAMER IC

REV. 1.1.1

319

The Behavior of the Signals between the Receive

Payload Data Output Interface block and the Ter-

minal Equipment

The behavior of the signals between the XRT7250

and the Terminal Equipment for E3 Serial Mode Op-

eration is illustrated in Figure 151.

5.3.5.2

Nibble-Parallel Mode Operation Behav-

ior of the XRT7250

If the XRT7250 has been configured to operate in the

Nibble-Parallel Mode, then the XRT7250 will behave

as follows.

Payload Data Output

The XRT7250 will output the payload data of the in-

coming E3 frames, via the RxNib[3:0] output pins, up-

on the rising edge of RxClk.

NOTES:

1. In this case, RxClk will function as the Nibble Clock

signal between the XRT7250 the Terminal Equip-

ment. The XRT7250 will pulse the RxClk output

signal "High" 1060 times, for each inbound E3

frame.

2. Unlike Serial Mode operation, the duty cycle of

RxClk, in Nibble-Parallel Mode operation is approx-

imately 25%.

Delineation of Inbound E3 Frames

The XRT7250 will pulse the RxFrame output pin

"High" for one nibble-period coincident with it driving

the very first nibble, within a given inbound E3 frame,

via the RxNib[3:0] output pins.

Interfacing the XRT7250 the Terminal Equipment.

Figure 152 presents a simple illustration as how the

user should interface the XRT7250 to that terminal

equipment which processes Receive Direction pay-

load data.

FIGURE 151. AN ILLUSTRATION OF THE BEHAVIOR OF THE SIGNALS BETWEEN THE RECEIVE PAYLOAD DATA OUT-

PUT

INTERFACE BLOCK OF THE XRT7250 AND THE TERMINAL EQUIPMENT

Terminal Equipment Signals

E3_Clock_In

E3_Data_Out

Rx_Start_of_Frame

E3_Overhead_Ind

XRT7250 Receive Payload Data I/F Signals

RxClk

RxSer

RxFrame

RxOH_Ind

Payload[1522]

Payload[1523]

FAS , Bit 9

FAS, Bit 8

Payload[1522]

Payload[1523]

FAS, Bit 9

FAS, Bit 8

Note: FAS pattern will not be processed by the

Transmit Payload Data Input Interface.

E3 Frame Number N

E3 Frame Number N + 1

Note: RxFrame pulses high to denote

E3 Frame Boundary.

Note: RxOH_Ind pulses high for 12

bit-periods in order to denote

Overhead Data (e.g., the FAS pattern,

the A and N bits).

XRT7250 Datasheet(PDF) 338 Page - Exar Corporation

XRT7250 Datasheet(HTML) 338 Page - Exar Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL