VSC7440 datasheet(278/444 Pages) MICROSEMI

278 / 444 page

Functional Descriptions

VMDS-10492 VSC7440 Datasheet Revision 4.2

261

•

Program an ES0 key

•

Set ES0 action TAG_A_PCP_SEL to 5 for selected key

•

Set ES0 action PUSH_OUTER_TAG = 1

•

Update PCP by using Table 1:

Select a base address in resource A. Base address 256 is used in this example

Set ES0 action MAP_1_IDX = 256/8 = 32

•

Use frame DSCP as key: Set ES0 action MAP_1_KEY = 2

•

Program the PCP mapping in table 1: Addr = 256 to 256 + 63 (all DSCP values)

•

Write REW:MAP_RES_A:$Addr/MAP_VAL_A PCP_VAL <New PCP>

Frame DSCP is used as key in this example. If the DSCP is not available (frame is non IP), the mapping

is considered invalid, and the PCP value is selected using this fallback method:

•

Use mapping table 1 if key is valid, otherwise use mapping table 0.

•

Use mapping table 0 if key is valid, otherwise use a fixed value.

In the example, a PCP value from table 0 is used instead for non IP frames, if the table 0 key is valid.

Otherwise, the ES0 action PCP_A_VAL is used. Mapping tables 2 and 3 have the same functionality.

Mapping tables 0 and 1 share the 2,048 addresses available in Resource A. Table 2 and 3 share 2,048

addresses in Resource B.

3.26.7

VLAN Editing

The rewriter performs five steps related to VLAN editing for each frame and destination:

ES0 lookup. ES0 is looked up for each frame if enabled by the global configuration. The action from

ES0 controls the pushing of VLAN tags.

VLAN popping. Zero to three VLAN tags are popped from the frame. Popping is controlled from the

ANA by IFH.TAGGING.POP_CNT and by the action ES0.POP_VAL.

VLAN push decision. Decides the number of new tags to push and which tag source to use for each

tag. Tag sources are port, ES0 (tags A to C), and routing.

Constructs the VLAN tags. The new VLAN tags are constructed based on the tag sources’

configuration.

VLAN pushing. The new VLAN tags are pushed.

The outermost tag can optionally be controlled by port-based VLAN configuration.

Table 183 •

Port VLAN Tag Configuration Registers

Description

Replication

TPID_CFG.

TPID_VAL

Configures three custom TPID values.

These must be configured identically in

ANA_CL::VLAN_STAG_CFG.STAG_ETYPE_VAL.

PORT_VLAN_CFG

PORT_*

Port VLAN TCI.

Port _VID is also used for untagged set.

Ports

TAG_CTRL:

TAG_CFG_OBEY_

WAS_TAGGED

Controls how port tags are added. If this bit is set, the IFH field

VSTAX.TAG.WAS_TAGGED must be 1 before a port tag is added

to a frame.

Ports

TAG_CTRL:

TAG_CFG

Controls port tagging. Four modes are supported.

Ports

TAG_CTRL:

TAG_TPID_CFG

Selects Tag Protocol Identifier (TPID) for port tagging.

Ports

TAG_CTRL:

TAG_VID_CFG

Selects VID in port tag.

Ports

TAG_CTRL:

TAG_PCP_CFG

Selects PCP fields in port tag.

Ports

TAG_CTRL:

TAG_DEI_CFG

Selects DEI fields in port tag.

Ports

VSC7440 Datasheet(PDF) 278 Page - Microsemi Corporation

VSC7440 Datasheet(HTML) 278 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL