 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
S3C9442 Datasheet(PDF) 4 Page - Samsung semiconductor |
|
|
|||||||||||||||||||||||||||||
S3C9442 Datasheet(HTML) 4 Page - Samsung semiconductor |
|
|
4 / 50 page  SAM88RCRI INSTRUCTION SET S3C9442/C9444/F9444/C9452/C9454/F9454 6-4 FLAGS REGISTER (FLAGS) The flags register FLAGS contains eight bits that describe the current status of CPU operations. Four of these bits, FLAGS.4–FLAGS.7, can be tested and used with conditional jump instructions; FLAGS register can be set or reset by instructions as long as its outcome does not affect the flags, such as, Load instruction. Logical and Arithmetic instructions such as, AND, OR, XOR, ADD, and SUB can affect the Flags register. For example, the AND instruction updates the Zero, Sign and Overflow flags based on the outcome of the AND instruction. If the AND instruction uses the Flags register as the destination, then simultaneously, two write will occur to the Flags register producing an unpredictable result. System Flags Register (FLAGS) D5H, R/W .7 .6 .5 .4 .3 .2 .1 .0 MSB LSB Carry flag (C) Zero flag (Z) Sign flag (S) Overflow flag (V) Not mapped Figure 6-1. System Flags Register (FLAGS) FLAG DESCRIPTIONS 33Overflow Flag (FLAGS.4, V) The V flag is set to "1" when the result of a two's-complement operation is greater than + 127 or less than – 128. It is also cleared to "0" following logic operations. Sign Flag (FLAGS.5, S) Following arithmetic, logic, rotate, or shift operations, the sign bit identifies the state of the MSB of the result. A logic zero indicates a positive number and a logic one indicates a negative number. Zero Flag (FLAGS.6, Z) For arithmetic and logic operations, the Z flag is set to "1" if the result of the operation is zero. For operations that test register bits, and for shift and rotate operations, the Z flag is set to "1" if the result is logic zero. Carry Flag (FLAGS.7, C) The C flag is set to "1" if the result from an arithmetic operation generates a carry-out from or a borrow to the bit 7 position (MSB). After rotate and shift operations, it contains the last value shifted out of the specified register. Program instructions can set, clear, or complement the carry flag. |
Similar Part No. - S3C9442 |
|
Similar Description - S3C9442 |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.COM |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
