Low Noise, Precision, 16 V, CMOS,

Rail-to-Rail Operational Amplifiers

Data Sheet

AD8663/AD8667/AD8669

Rev. D

Document Feedback

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibilityis assumedbyAnalogDevicesforitsuse,norforanyinfringementsof patentsorother

rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

©2007–2016 Analog Devices, Inc. All rights reserved.

Technical Support

www.analog.com

FEATURES

Low offset voltage: 175 μV maximum @ VSY = 5 V

Low supply current: 275 μA maximum per amplifier

Single-supply operation: 5 V to 16 V

Low noise: 23 nV/√Hz

Low input bias current: 300 fA

Unity-gain stable

Small packages available

3 mm × 3 mm, 8-lead LFCSP

8-lead MSOP

Other packages

8-lead SOIC

14-lead SOIC

14-lead TSSOP

APPLICATIONS

Sensor front ends

Transimpedance amplifiers

Electrometer applications

Photodiode amplification

Low power ADC drivers

Medical diagnostic instruments

pH and ORP meters and probes

DAC or REF buffers

PIN CONFIGURATIONS

NC 1

–IN 2

+IN 3

V– 4

NC

8

V+

7

OUT

6

NC

5

NC = NO CONNECT

AD8663

TOP VIEW

(Not to Scale)

NOTES

1. NC = NO CONNECT. DO NOT

CONNECT TO THIS PIN.

2. CONNECT THE EXPOSED PAD TO

V– OR LEAVE IT UNCONNECTED.

3

+IN

4

V–

1

NC

2

–IN

6OUT

5NC

8NC

7V+

AD8663

TOP VIEW

(Not to Scale)

Figure 1. 8-Lead SOIC (R-8)

Figure 2. 8-Lead LFCSP (CP-8-13)

OUT A 1

–IN A 2

+IN A 3

V– 4

V+

8

OUT B

7

–IN B

6

+IN B

5

AD8667

TOP VIEW

(Not to Scale)

OUT A

1

–IN A

2

+IN A

3

V+

4

OUT D

14

–IN D

13

+IN D

12

V–

11

+IN B

5

+IN C

10

–IN B

6

–IN C

9

OUT B

7

OUT C

8

AD8648

TOP VIEW

(Not to Scale)

1

2

3

4

14

13

12

11

5

10

6

9

7

8

AD8669

TOP VIEW

(Not to Scale)

Figure 3. 8-Lead MSOP (RM-8),

8-Lead SOIC (R-8)

Figure 4. 14-Lead SOIC (R-14),

14-Lead TSSOP (RU-14)

GENERAL DESCRIPTION

The AD8663/AD8667/AD8669 are rail-to-rail output amplifiers

that use the Analog Devices, Inc., patented DigiTrim® trimming

technique to achieve low offset voltage. The AD8663/AD8667/

AD8669 feature an extended operating range with supply

voltages up to 16 V. They also feature low input bias current,

low input offset voltage, and low current noise.

The combination of low offset, very low input bias current, and

a wide supply range makes these amplifiers useful in a wide variety

of applications usually associated with higher priced JFET ampli-

fiers. Systems using high impedance sensors, such as photodiodes,

benefit from the combination of low input bias current, low

noise, low offset, and wide bandwidth.

The ability to operate the device for single (5 V to 16 V) or dual

supplies (±2.5 V to ±8 V) supports many applications. The rail-

to-rail outputs provide increased dynamic range to drive low

frequency data converters. The low bias current drift is well-

suited for precision I-to-V converters. The combination of

precision offset, offset drift, and low noise also make the op

amps ideal for gain, dc offset adjust, and active filter in both

instrumentation and medical applications. These low power

op amps can be used in IR thermometers, pH and ORP instru-

ments, pressure transducer front ends, and other sensor signal

conditioning circuits that are used in remote or wireless

applications.

The AD8663/AD8667/AD8669 are specified over the extended

industrial temperature range of −40°C to +125°C. The single

AD8663 is available in a narrow 8-lead SOIC package and a very

thin, 8-lead LFCSP. The dual AD8667 is available in a narrow

8-lead SOIC package and an 8-lead MSOP. The quad AD8669

is available in a 14-lead SOIC and 14-lead small TSSOP.