HD6432142 datasheet(816/1177 Pages) RENESAS

816 / 1177 page

Section 26 Electrical Characteristics

Rev. 4.00 Sep 27, 2006 page 772 of 1130

REJ09B0327-0400

6. The upper limit of the port 6 applied voltage is V

CC +0.3 V when CIN input is not

selected, and the lower of V

CC +0.3 V and AVCC +0.3 V when CIN input is selected.

When a pin is in output mode, the output voltage is equivalent to the applied voltage.

7. The upper limit of the port A applied voltage is V

CCB +0.3 V when CIN input is not

selected, and the lower of V

CCB +0.3 V and AVCC +0.3 V when CIN input is selected.

When a pin is in output mode, the output voltage is equivalent to the applied voltage.

8. Port A characteristics depends on V

CCB (or on VCC when other pins are in output mode).

9. Current dissipation values are for V

IH min = VCC –0.5 V, VCCB –0.5 V, and VIL max = 0.5 V

with all output pins unloaded and the on-chip pull-up MOSs in the off state.

10. The values are for V

RAM ≤ VCC < 4.5V, VIH min = VCC × 0.9, VCCB × 0.9, and VIL max =

0.3 V.

11. For flash memory program/erase operations, the applicable range is T

a = 0 to +75°C

(regular specifications) or T

a = 0 to +85°C (wide-range specifications).

HD6432142 Datasheet(PDF) 816 Page - Renesas Technology Corp