| Electronic Components Datasheet Search |
|
MEC1322 Datasheet(PDF) 389 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MEC1322 Datasheet(HTML) 389 Page - Microchip Technology |
|
389 / 456 page ![]() 2014 - 2015 Microchip Technology Inc. DS00001719D-page 389 MEC1322 37.0 ELECTRICAL SPECIFICATIONS 37.1 Maximum Ratings* *Stresses exceeding those listed could cause permanent damage to the device. This is a stress rating only and func- tional operation of the device at any other condition above those indicated in the operation sections of this specification is not implied. 37.1.1 ABSOLUTE MAXIMUM THERMAL RATINGS 37.1.2 ABSOLUTE MAXIMUM SUPPLY VOLTAGE RATINGS 37.1.3 ABSOLUTE MAXIMUM I/O VOLTAGE RATINGS Note 37-1 The Power Supply used to power the buffer is shown in the Signal Power Well column of the Pin Multiplexing Tables in Section 1.0 “Pin Configuration”. 37.2 Operational Specifications 37.2.1 POWER SUPPLY OPERATIONAL CHARACTERISTICS Note: When powering this device from laboratory or system power supplies, it is important that the Absolute Max- imum Ratings not be exceeded or device failure can result. Some power supplies exhibit voltage spikes on their outputs when the AC power is switched on or off. In addition, voltage transients on the AC power line may appear on the DC output. If this possibility exists, it is suggested that a clamp circuit be used. TABLE 37-1: ABSOLUTE MAXIMUM THERMAL RATINGS Parameter Maximum Limits Operating Temperature Range 0oC to +70oC Commercial -40oC to +85oC Industrial Storage Temperature Range -55o to +150oC Lead Temperature Range Refer to JEDEC Spec J-STD-020B TABLE 37-2: ABSOLUTE POWER SUPPLY RATINGS Symbol Parameter Maximum Limits VBAT 3.0V Battery Backup Power Supply with respect to ground -0.3V to +3.63V VCC1 3.3V Suspend Power Supply with respect to ground -0.3V to +3.63V VCC2 3.3V Main Power Supply with respect to ground -0.3V to +3.63V Parameter Maximum Limits Voltage with respect to ground on any pin without back- drive protection -0.3V to (Power Supply used to power the buffer) + 0.3V (Note 37-1) TABLE 37-3: POWER SUPPLY OPERATING CONDITIONS Symbol Parameter MIN TYP MAX Units VBAT Battery Backup Power Supply 2.0 3.0 3.6 V VCC1 Suspend Power Supply 3.135 3.3 3.465 V Note: The specification for the VCC1 supply is +/- 5%. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |