| Electronic Components Datasheet Search |
|
SP1002 Datasheet(PDF) 2 Page - Littelfuse |
|
|
|||||||||||||||||||||||||||||
SP1002 Datasheet(HTML) 2 Page - Littelfuse |
|
2 / 4 page ![]() © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 TVS Diode Arrays (SPA®Diodes) General Purpose ESD Protection - SP1002 Series Electrical Characteristics (T OP = 25°C) Parameter Symbol Test Conditions Min Typ Max Units Voltage Drop V D I R=1mA 6.0 9.5 V Reverse Standoff Voltage V RWM I R≤1µA with 1 I/O at GND 6.0 V Leakage Current I LEAK V R=5V with I/O at GND 0.5 µA Clamp Voltage1 V C I PP=1A, tp=8/20µs, Fwd 9.2 13.0 V I PP=2A, tp=8/20µs, Fwd 11.2 16.0 V Dynamic Resistance R DYN (V C2 - VC1) / (IPP2 - IPP1) 2.0 Ω ESD Withstand Voltage1,2 V ESD IEC61000-4-2 (Contact) ±8 kV IEC61000-4-2 (Air) ±15 kV Diode Capacitance1 C D Reverse Bias=0V 6 pF Reverse Bias=2.5V 5 pF Reverse Bias=5V 5 pF Notes: 1 Parameter is guaranteed by device characterization 2 A minimum of 1,000 ESD pulses are applied at 1s intervals Thermal Information Parameter Rating Units Storage Temperature Range –55 to 150 °C Maximum Junction Temperature 150 °C Maximum Lead Temperature (Soldering 20-40s) 260 °C Absolute Maximum Ratings Symbol Parameter Value Units I PP Peak Current (t p=8/20μs) 2 A T OP Operating Temperature –40 to 125 °C T STOR Storage Temperature –55 to 150 °C CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Time TP TL TS(max) TS(min) 25 tP tL tS time to peak temperature Preheat Preheat Ramp-up Ramp-up Ramp-down Ramp-do Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat -Temperature Min (T s(min)) 150°C -Temperature Max (T s(max)) 200°C -Time (min to max) (t s) 60 – 180 secs Average ramp up rate (Liquidus)Temp (T L) to peak 3°C/second max T S(max) to TL - Ramp-up Rate 3°C/second max Reflow -Temperature (T L) (Liquidus) 217°C -Temperature (t L) 60 – 150 seconds PeakTemperature (T P) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peakTemperature (T P) 8 minutes max. Do not exceed 260°C Soldering Parameters |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |