OV7410 datasheet(7/18 Pages) ETC

7 / 18 page

December 7, 1999

Version 1.4

OV7910P/OV7410P/OV7411P

SINGLE IC CMOS COLOR & B/W PAL ANALOG CAMERAS

OMNIVISION TECHNOLOGIES, Inc.

Preliminary

well. GAMMA (pin 27) can be used to set the GAMMA

correction. BKLT (pin 21) controls how the OV7910P/

OV7410P/OV7411P image sensors manage backlight

conditions. These functions may also be controlled

through the I2C interface.

At power up, AGC and AEC are enabled. AGC can be

disabled at power up by configuring the AGCEN pin

(pin 28) as required. AEC cannot be enabled/disabled

externally and must be reprogrammed through the I2C

port.

1.6

Other Image Sensor Control Functions

Additional programmable functions for the OV7910P/

OV7410P/OV7411P image sensors include sharpness

adjustment, brightness level fine tune, color saturation

adjustment, mirror image control, and power down. All

of these functions (except power down) can be config-

ured either by an external pin or through the I2C inter-

face.

OV7410 Datasheet(PDF) 7 Page - List of Unclassifed Manufacturers