MP2013GG datasheet(2/15 Pages) MPS

2 / 15 page

MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR

ORDERING INFORMATION

Part Number*

Package

Top Marking

MP2013GJ

TSOT23-5

AFF

MP2013GG

QFN6 (2x2mm)

MP2013GQ

QFN8 (3x3mm)

AFF

MP2013GQ-33

QFN8 (3x3mm)

AGG

* For Tape & Reel, add suffix –Z (e.g. MP2013GJ–Z);

PACKAGE REFERENCE

TSOT23-5

QFN6(2x2mm)

QFN8(3x3mm)

ABSOLUTE MAXIMUM RATINGS

(1)

IN1, IN2 ..................................... -0.3V to +42V

OUT............................................. -0.3V to +17V

FB ................................................ -0.3V to +6V

Lead Temperature ................................... 260

°C

Storage Temperature............... -65

°C to +150°C

Continuous Power Dissipation (TA = +25°C)

(2)

QFN8(3x3mm) .........................................2.08W

QFN6(2x2mm) .........................................1.25W

TSOT23-5................................................0.45W

ESD SUSCEPTIBILITY

(3)

HBM (Human Body Mode) ..........................2kV

MM (Machine Mode) ................................ 200V

Recommended Operating Conditions

(4)

Supply Voltage VIN .......................... 2.5V to 40V

Output Voltage VOUT ................... 1.215V to 15V

Operating Junction Temp. (TJ). -40°C to +125°C

Thermal Resistance

(5)

θJA

θJC

TSOT23-5 ............................. 220 .... 110..

°C/W

QFN6(2x2mm) ....................... 80 ...... 16...

°C/W

QFN8(3x3mm) ....................... 48 ...... 11...

°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient th

ermal resistance θ

JA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA

)/θ

JA.

Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) Devices are ESD sensitive. Handling precaution

recommended.

4) The device is not guaranteed to function outside of its

operating conditions.

5) Measured on JESD51-7, 4-layer PCB.

MP2013 Rev. 1.0

www.MonolithicPower.com

4/23/2014

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

MP2013GG Datasheet(PDF) 2 Page - Monolithic Power Systems

MP2013GG Datasheet(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Datasheet Download

Link URL