Notes

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.

B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.

C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled

to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp

The Big Deal

• Low insertion Loss typical 0.5 dB

• Sharp roll-off

• Wide stop band rejection till 2200 MHz

• Very good VSWR typical 1.3:1

• Miniature shielded package

Product Overview

The SXLP-13+ is a lowpass filter in a shielded package (size of 0.440" x 0.740" x 0.270") fabricated using SMT tech-

nology. Covering DC to 13 MHz band width, these units offer good matching within the passband and high rejection

44 dB typical. This model uses miniature high Q capacitors and wire welded inductors for high reliability. In addition it

has repeatable performance across production lots and consistent performance across temperature.

Key Features

SXLP-13+

50Ω

DC to 13 MHz

CASE STYLE: HF1139

Low Pass Filter

Surface Mount

Page 1 of 3

Feature

Advantages

Sharp roll-off

Sharp roll-off, this will attenuate frequencies closer to the passband with good rejection.

High rejection

This enables the filters to attenuate spurious signals and reject harmonics for broadband frequency.

Small size, 0.440" x 0.740" x 0.270"

The small surface mount package enables the SXLP-13+ to be used in compact designs.