MP3331GC datasheet(4/25 Pages) MPS

4 / 25 page

MP3331-2A SYNCHRONOUS BOOST FLASH LED DRIVER WITH I

2C INTERFACE

MP3331 Rev. 1.02

www.MonolithicPower.com

5/3/2016

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ABSOLUTE MAXIMUM RATINGS

(1)

All the pins ......................................-0.3V to +6V

Junction temperature ................................150°C

Lead temperature .....................................260°C

Continuous power dissipation (TA = 25°C)

(2)

WLCSP-9 (1.7mm x 1.7mm).................... 1.14W

Recommended Operating Conditions

(3)

Supply voltage (VIN) ........................2.7V to 5.5V

Operating junction temp........... -40°C to +125°C

Thermal Resistance

(4)

θJA

θJC

WLCSP-9 (1.7mm x 1.7mm)….110….0.5..°C/W

NOTES:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will produce an excessive die temperature,

causing the regulator to go into thermal shutdown. Internal

thermal shutdown circuitry protects the device from

permanent damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP3331GC Datasheet(PDF) 4 Page - Monolithic Power Systems