LT1352 datasheet(11/22 Pages) LINER

11 / 22 page

LT6023/LT6023-1

60231fa

For more information www.linear.com/LT6023

PIN FUNCTIONS

OUT: Amplifier Output.

–IN: Inverting Input of the Amplifier.

+IN: Noninverting Input of the Amplifier.

V–: Negative Power Supply. A bypass capacitor should be

used between supply pins and ground. Additional bypass

capacitance may be used between the power supply pins.

DGND(LT6023-1Only):ReferenceforENPin.Itisnormally

tied to ground. DGND must be in the range from V– to V+

–3V. If grounded, V+ must be ≥ 3V. The EN pin threshold

is specified with respect to the DGND pin. DGND cannot

be floated.

EN (LT6023-1 Only): Enable Input. This pin must be

connected high, normally to V+, for the amplifiers to be

functional. EN is active high with the threshold approxi-

mately two diodes above DGND. EN cannot be floated.

The shutdown threshold voltage is specified with respect

to the voltage on the DGND pin.

V+: Positive Power Supply. A bypass capacitor should be

used between supply pins and ground. Additional bypass

capacitance may be used between the power supply pins.

SIMPLIFIED SCHEMATIC

60231 SS

+IN

V+

–IN

OUT

LT6023-1 ONLY

DGND

V–

LOAD

CLASS AB

DRIVE

LT1352 Datasheet(PDF) 11 Page - Linear Technology