ISL8325IBZ datasheet(3/11 Pages) RENESAS

3 / 11 page

ISL8323, ISL8324, ISL8325

FN6023 Rev 2.00

Page 3 of 11

October 7, 2015

Absolute Maximum Ratings

Thermal Information

V+ to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to15V

Input Voltages

IN, NO, NC, COM (Note 2) . . . . . . . . . . . . . . -0.3 to ((V+) + 0.3V)

Continuous Current (NO, NC, or COM) . . . . . . . . . . . . . . . . . . 30mA

Peak Current NO, NC, or COM

(Pulsed 1ms, 10% Duty Cycle, Max) . . . . . . . . . . . . . . . . . 100mA

ESD Rating (Per MIL-STD-883 Method 3015). . . . . . . . . . . . . .>2kV

Operating Conditions

Temperature Range

ISL832XIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40oC to 85oC

Thermal Resistance (Typical, Note 5)

JA (oC/W)

8 LD SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . .

170

Maximum Junction Temperature (Plastic Package) . . . . . . . 150oC

Moisture Sensitivity (See Technical Brief TB363)

All Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Level 1

Maximum Storage Temperature Range. . . . . . . . . . . . -65oC to 150oC

Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300oC

(SOIC - Lead Tips Only)

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the

device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTES:

4. Signals on NC, NO, COM, or IN exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to maximum current ratings.

JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.

Electrical Specifications - 5V Supply

Test Conditions: V+ = +4.5V to +5.5V, GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 6),

Unless Otherwise Specified

PARAMETER

TEST CONDITIONS

TEMP

(oC)

MIN

(NOTE 7)

TYP

MAX

(NOTE 7) UNITS

ANALOG SWITCH CHARACTERISTICS

Analog Signal Range, VANALOG

Full

V+

ON Resistance, RON

V+ = 4.5V, ICOM = 1.0mA, VNO or VNC = 3.5V,

See Figure 5



Full



RON Matching Between Channels,

RON

V+ = 5V, ICOM = 1.0mA, VNO or VNC= 3V

0.8



Full



RON Flatness, RFLAT(ON)

V+ = 5V, ICOM = 1.0mA, VNO or VNC = 1V, 2V, 3V

Full



NO or NC OFF Leakage Current,

INO(OFF) or INC(OFF)

V+ = 5.5V, VCOM = 1V, 4.5V, VNO or VNC = 4.5V, 1V,

Note 8

-0.1

0.1

Full

-5

COM OFF Leakage Current,

ICOM(OFF)

V+ = 5.5V, VCOM = 4.5V, 1V, VNO or VNC = 1V, 4.5V,

Note 8

-0.1

0.1

Full

-5

COM ON Leakage Current,

ICOM(ON)

 = 5.5V, VCOM = 5V, or VNO or VNC = 5V, Note 8

-0.2

0.2

Full

-10

DYNAMIC CHARACTERISTICS

Turn-ON Time, tON

VNO or VNC = 3V, RL =1k, CL = 35pF, VIN = 0 to 3V,

See Figure 1

150

Full

240

Turn-OFF Time, tOFF

VNO or VNC = 3V, RL =1k, CL = 35pF, VIN = 0 to 3V,

See Figure 1

100

Full

150

Break-Before-Make Time Delay

(ISL8325), tD

RL = 300, CL = 35pF, VNO = VNC = 3V, VIN = 0 to 3V,

See Figure 3

Full

Charge Injection, Q

CL = 1.0nF, VG = 0V, RG = 0, See Figure 2

OFF Isolation

RL = 50, CL = 5pF, f = 1MHz, See Figure 4

Crosstalk (Channel-to-Channel)

RL = 50, CL = 5pF, f = 1MHz, See Figure 6

-85

NO or NC OFF Capacitance, COFF f = 1MHz, VNO or VNC = VCOM = 0V, See Figure 7

COM OFF Capacitance,

CCOM(OFF)

f = 1MHz, VNO or VNC = VCOM = 0V, See Figure 7

COM ON Capacitance, CCOM(ON) f = 1MHz, VNO or VNC = VCOM = 0V, See Figure 7

POWER SUPPLY CHARACTERISTICS

Power Supply Range

Full

2.7

Positive Supply Current, I+

V+ = 5.5V, VIN = 0V or V+, all channels on or off

Full

-1

0.0001

A

ISL8325IBZ Datasheet(PDF) 3 Page - Renesas Technology Corp

ISL8325IBZ Datasheet(HTML) 3 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11

Datasheet Download

Link URL