FN8127 Rev 4.00

Page 21 of 21

November 12, 2015

X5083

Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted

in the quality certifications found at www.intersil.com/en/support/qualandreliability.html

Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such

modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are

current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its

subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

For additional products, see www.intersil.com/en/products.html

© Copyright Intersil Americas LLC 2005-2015. All Rights Reserved.

All trademarks and registered trademarks are the property of their respective owners.

Thin Shrink Small Outline Plastic Packages (TSSOP)



INDEX

AREA

E1

D

N

12

3

-B-

0.10(0.004)

C A

M

BS

e

-A-

b

M

-C-

A1

A

SEATING PLANE

0.10(0.004)

c

E

0.25(0.010)

B

M

M

L

0.25

0.010

GAUGE

PLANE

A2

NOTES:

1. These package dimensions are within allowable dimensions of

JEDEC MO-153-AC, Issue E.

2. Dimensioning and tolerancing per ANSI Y14.5M-1982.

3. Dimension “D” does not include mold flash, protrusions or gate burrs.

Mold flash, protrusion and gate burrs shall not exceed 0.15mm

(0.006 inch) per side.

4. Dimension “E1” does not include interlead flash or protrusions. Inter-

lead flash and protrusions shall not exceed 0.15mm (0.006 inch) per

side.

5. The chamfer on the body is optional. If it is not present, a visual index

feature must be located within the crosshatched area.

6. “L” is the length of terminal for soldering to a substrate.

7. “N” is the number of terminal positions.

8. Terminal numbers are shown for reference only.

9. Dimension “b” does not include dambar protrusion. Allowable dambar

protrusion shall be 0.08mm (0.003 inch) total in excess of “b” dimen-

sion at maximum material condition. Minimum space between protru-

sion and adjacent lead is 0.07mm (0.0027 inch).

10. Controlling dimension: MILLIMETER. Converted inch dimensions

are not necessarily exact. (Angles in degrees)

0.05(0.002)

M8.173

8 LEAD THIN SHRINK NARROW BODY SMALL OUTLINE

PLASTIC PACKAGE

SYMBOL

INCHES

MILLIMETERS

NOTES

MIN

MAX

MIN

MAX

A

-

0.047

-

1.20

-

A1

0.002

0.006

0.05

0.15

-

A2

0.031

0.051

0.80

1.05

-

b

0.0075

0.0118

0.19

0.30

9

c

0.0035

0.0079

0.09

0.20

-

D

0.116

0.120

2.95

3.05

3

E1

0.169

0.177

4.30

4.50

4

e

0.026 BSC

0.65 BSC

-

E

0.246

0.256

6.25

6.50

-

L

0.0177

0.0295

0.45

0.75

6

N8

8

7



-

Rev. 1 12/00