SMP253 datasheet(1/2 Pages) ETC

Part #	SMP253

Description	EMI suppressor, class Y2, metallized paper SMD

PDF	2 Pages

Scroll/Zoom	100%

Manufacturer	ETC [List of Unclassifed Manufacturers]

Direct Link

Logo

1 / 2 page

180

250 VAC 50/60 Hz

0.001 – 0.0047 µF

± 20%

–40 to +100°C

40/100/56/B

S, UL, CSA

≤ 1.3 % at 1 kHz

≥ 12000 MΩ

Measured at 500 VDC after 60 s, +23°C

The 100% screening factory test is carried

out at 3000 VDC. The voltage level

is

selected to meet the requirements in

applicable equipment standards. All

electrical characteristics are checked after

the test.

SMP253

• EMI suppressor, class Y2, metallized paper SMD

• 0.001 – 0.0047 µF, 250 VAC, +100 °C

TYPICAL APPLICATIONS

CONSTRUCTION

TECHNICAL DATA

The capacitors are intended for use

as interference suppressors in Y2

applications, line-to-earth.

Multi-layer metallized paper. Encapsulated

and impregnated in self-extinguishing

material meeting the requirements of UL

94V-0.

Rated voltage

Capacitance range

Capacitance tolerance

Temperature range

Climatic category IEC

Approvals

Dissipation factor tan

δδδδδ

Insulation resistance

Test voltage between terminals

Vibration

IEC 60068-2-6

3 directions at 2 hour each

No visible damage

Test Fc

10 – 500 Hz at 0.75 mm or 98 m/s2

No open or short circuit

Active flammability

EN 132400

Passive flammability

IEC 60384-14 (1993)

Class B

EN 132400

Humidity

IEC 60068-2-3

+40°C and

56 days

Test Ca

90 – 95% R.H.

ENVIRONMENTAL TEST DATA

RECOMMENDED SOLDERING CONDITIONS

Electrode temperature, Reflow soldering

Preheating temperature should be less

than 160°C. The time above 180°C should

be less than 1 minute. The peak

temperature must not exceed 240°C.

Recommended reflow soldering profile

Temperature (

°C)

200

30

60

90 120 150 180 210

t(s)

150

100

50

240 270 300

0

250

0

Max 160

°C

Max 240

°C

Max 60 s

over 180

°C

B

L

H

0.5

Components may be vertically mounted

for decreased footprint. See page 69.

Similar Part No. - SMP253

Manufacturer	Part #	Datasheet	Description
Kemet Corporation	SMP253	1Mb / 8P	Impregnated Metallized Paper EMI Suppression Capacitors SMP253, Class Y2, 250 VAC Surface Mount Device 11/2/2020
	SMP253	681Kb / 12P	Impregnated Metallized Paper EMI Suppression Capacitors SMP253, Class Y2, 300 VAC SMD (Automotive Grade) 4/24/2024
	SMP253EA4100MB31TR24	681Kb / 12P	Impregnated Metallized Paper EMI Suppression Capacitors SMP253, Class Y2, 300 VAC SMD (Automotive Grade) 4/24/2024
	SMP253EA4100MB31TV24	681Kb / 12P	Impregnated Metallized Paper EMI Suppression Capacitors SMP253, Class Y2, 300 VAC SMD (Automotive Grade) 4/24/2024
	SMP253EA4150MB31TR24	681Kb / 12P	Impregnated Metallized Paper EMI Suppression Capacitors SMP253, Class Y2, 300 VAC SMD (Automotive Grade) 4/24/2024

More results

Similar Description - SMP253

Manufacturer	Part #	Datasheet	Description
List of Unclassifed Man...	PME294	48Kb / 2P	EMI suppressor, class Y1, metallized paper
	PME278	47Kb / 2P	EMI suppressor, class X1, metallized paper
	PME290	49Kb / 2P	EMI suppressor, classes X1 and Y2, metallized paper
	PME264	49Kb / 2P	EMI suppressor, class X2, metallized paper
	PZB300	52Kb / 2P	Delta EMI suppressor, classes X2 and Y2, metallized paper
	PME271Y	54Kb / 3P	EMI suppressor, class Y2, metallized paper
	PME285	49Kb / 2P	EMI suppressor, class X2, metallized paper
Kemet Corporation	PHE850	199Kb / 2P	EMI suppressor, class Y2, metallized polypropylene
	PME271E510M	163Kb / 2P	EMI suppressor, class X1, metallized paper
	PME271Y	168Kb / 2P	EMI suppressor, class Y2, metallized paper

More results

SMP253 Datasheet(PDF) 1 Page - List of Unclassifed Manufacturers

SMP253 Datasheet(HTML) 1 Page - List of Unclassifed Manufacturers

Similar Part No. - SMP253

Similar Description - SMP253

Html Pages

1 2

Datasheet Download

Link URL