© PHOENIX CONTACT - 03/2008

103148_en_02

INTERFACE

PLC-OS…

Data Sheet

1Description

PLC-OS… relay modules, which can be used universally,

comprise 6.2 mm basic terminal blocks and plug-in

miniature solid-state relays with screw or spring-cage

connection.

1.1

Input Voltages From 24 V to 230 V

industrial voltages from 24 V to 230 V. A further advantage

is the ready-integrated input circuit. It consists of a status

indicator and polarity reversal protection function, and

ensures that the operating state is displayed clearly, also

preventing destruction of the optical electronics should the

polarity be accidentally reversed.

1.2

Plug-In Bridges Save Wiring

The PLC INTERFACE module achieves maximum

efficiency with the user-friendly FBST plug-in bridge system.

The PLC-OS… makes effective use of the bridging options

for the A1/A2 connection on the control side and for the

power supply at connection 13 on the load side. Especially

effective here are the 500 mm long color-insulated

continuous plug-in bridges that can easily be cut to the

required length and quickly inserted in the bridge shafts.

They eliminate the need for complicated and time-

consuming loop bridges.

1.3

Additional Advantages

–

Switching power of up to 24 V DC/3 A, depending on

the type

–

IP67-protected fully encapsulated optical electronics

–

Available with input or power solid-state relays as an

option

–

Integrated input circuit

–

Solid-state relay can be replaced using an engagement

lever

–

Wear-resistant switching

–

Resistant to vibrations and shocks

–

Inflammability class V0 according to UL94

Make sure you always use the latest documentation.

It can be downloaded at www.download.phoenixcontact.com.

A conversion table is available on the Internet at

www.download.phoenixcontact.com/general/7000_en_00.pdf.

This data sheet is valid for all products listed on the following page:

PLC INTERFACE With Solid-State Relay,

Universal Version