For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

7

7 - 7

HMC831LP6CE

v05.1211

FRACTIONAL-N PLL WITH

INTEGRATED VCO, 1815 - 2010 MHz

Outline Drawing

Part Number

Package Body Material

Lead Finish

MSL Rating

HMC831LP6CE

RoHS-compliant Low Stress Injection Molded Plastic

100% matte Sn

MSL1

H831

XXXX

[1] 4-Digit lot number XXXX

Package Information

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS].

3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE

4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.

PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

6. ALL GROUND LEADS AND GROUND PADDLE MUST

BE SOLDERED TO PCB RF GROUND.

7. REFER TO HITTITE APPLICATION NOTE FOR

SUGGESTED PCB LAND PATTERN.

Absolute Maximum Ratings

AVDD, RVDD, DVDD3V, VCCPD,

VCCHF, VCCPS

-0.3V to +3.6V

VPPCP, VDDCP, VCC1

-0.3V to +5.8V

VCC2

-0.3V to +5.5V

Operating Temperature

-40°C to +85°C

Storage Temperature

-65°C to 125°C

Maximum Junction Temperature

125 °C

(junction to ground paddle)

20 °C/W

Reflow Soldering

Peak Temperature

260°C

Time at Peak Temperature

40 sec

ESD Sensitivity (HBM)

Class 1B

Stresses above those listed under Absolute Maximum

Ratings may cause permanent damage to the device.

This is a stress rating only; functional operation of the

device at these or any other conditions above those

indicated in the operational section of this specification

is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device

reliability.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D