AOW292 datasheet(2/6 Pages) AOSMD

2 / 6 page

Symbol

Min

Typ

Max

Units

BVDSS

100

VDS=100V, VGS=0V

TJ=55°C

IGSS

±100

VGS(th)

Gate Threshold Voltage

2.3

2.8

3.4

3.3

4.1

TJ=125°C

5.4

6.7

3.8

4.9

mΩ

gFS

VSD

0.68

105

Ciss

6775

Coss

557

Crss

0.4

0.8

1.2

Ω

Qg(10V)

126

Qgs

Qgd

13.5

tD(on)

11.5

tD(off)

trr

Electrical Characteristics (TJ=25°C unless otherwise noted)

STATIC PARAMETERS

Parameter

Conditions

Drain-Source Breakdown Voltage

ID=250µA, VGS=0V

mΩ

µA

Body Diode Reverse Recovery Time

Turn-Off DelayTime

Turn-Off Fall Time

VGS=10V, VDS=50V, RL=2.5Ω,

RGEN=3Ω

IF=20A, dI/dt=500A/µs

Turn-On Rise Time

Turn-On DelayTime

VDS=0V, VGS=±20V

Maximum Body-Diode Continuous Current

Input Capacitance

Gate-Body leakage current

Diode Forward Voltage

DYNAMIC PARAMETERS

VGS=6V, ID=20A

Reverse Transfer Capacitance

VGS=0V, VDS=50V, f=1MHz

VDS=VGS, ID=250µA

Output Capacitance

Forward Transconductance

VGS=10V, VDS=50V, ID=20A

Total Gate Charge

Gate resistance

f=1MHz

IDSS

Zero Gate Voltage Drain Current

RDS(ON)

Static Drain-Source On-Resistance

IS=1A,VGS=0V

VDS=5V, ID=20A

VGS=10V, ID=20A

Gate Source Charge

Gate Drain Charge

SWITCHING PARAMETERS

trr

Qrr

380

THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL

COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING

OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,

FUNCTIONS AND RELIABILITY WITHOUT NOTICE.

Body Diode Reverse Recovery Charge

Body Diode Reverse Recovery Time

IF=20A, dI/dt=500A/µs

A. The value of RθJA is measured with the device mounted on 1in

2 FR-4 board with 2oz. Copper, in a still air environment with T

A =25°C. The

Power dissipation P

DSM is based on R

θJA t≤ 10s and the maximum allowed junction temperature of 150°C. The value in any given application

depends on the user's specific board design, and the maximum temperature of 175

C may be used if the PCB allows it.

B. The power dissipation P

D is based on TJ(MAX)=175°C, using junction-to-case thermal resistance, and is more useful in setting the upper

dissipation limit for cases where additional heatsinking is used.

C. Single pulse width limited by junction temperature T

J(MAX)=175°C.

D. The RθJA is the sum of the thermal impedance from junction to case RθJC and case to ambient.

E. The static characteristics in Figures 1 to 6 are obtained using <300

µs pulses, duty cycle 0.5% max.

F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming

a maximum junction temperature of T

J(MAX)=175°C. The SOA curve provides a single pulse rating.

G. The maximum current rating is package limited.

H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with T

A=25°C.

Rev.1.0: February 2015

www.aosmd.com

Page 2 of 6

AOW292 Datasheet(PDF) 2 Page - Alpha & Omega Semiconductors

AOW292 Datasheet(HTML) 2 Page - Alpha & Omega Semiconductors

Html Pages

1 2 3 4 5 6

Datasheet Download

Link URL