106980 datasheet(14/25 Pages) PHOENIX

14 / 25 page

TRIO-PS-2G/1AC/12DC/10

106980_en_00

PHOENIX CONTACT 14 / 25

9Cooling

Heat is dissipated from the power supply via the heatsinks

integrated into the housing surfaces. Convection to

dissipate heat from the power supply only takes place in

small dimensions above the housing openings.

Figure 4

Convection

Mounting position and dimensions

10.1

Mounting position

Figure 5

Locked areas

Possible mounting positions:

Normal mounting position, installation depth 115 mm (+ DIN

rail)

The power supply can be aligned without

minimum lateral clearance up to an ambient

temperature of 40°C. In a temperature range

up to ≤ 70°C, a lateral minimum clearance of

10 mm between two active components (e.g.,

power supply) is required.

The device can be snapped onto all DIN rails

in accordance with EN 60715 and should be

mounted in the normal mounting position.

To ensure sufficient wiring space to wire the

power supply, we recommend a vertical

minimum clearance from other devices of 50

mm. Depending on the cable duct used, a

smaller clearance may be possible.

L/+

N/-

2- 8V

DC OK

106980 Datasheet(PDF) 14 Page - PHOENIX CONTACT