Universal Data Logger

DS7000

© TT electronics plc

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Issue A

07/2018 Page 2

TT Electronics | Roxspur Measurement & Control

2 Downgate Drive, Sheffield, South Yorkshire, S4 8BT, UK |Ph: +44 (0) 114-244-2521

www.ttelectronics.com | RoxspurSales@ttelectronics.com

Universal Inputs

Pt100: 2 or 3 wire C or F (BS EN 60751/JIS 1604)

Ni100, Ni120: 2 or 3 wire C or F

Cu10: 2 or 3 wire C or F

Thermocouples: J, K, T, R, S, B, N C or F

Thermistor: (various types) C or F

0-20mA: scaled in engineering units

±100mV: DC scaled in engineering units

0-1V DC: scaled in engineering units

0-10V DC: scaled in engineering units

Slidewire: scaled in engineering units (100ohm to 10kohm)

Resolutions

All universal inputs: 16-bit

Internal and external temperature: 12-bit

Internal and external RH: 8-bit

Counter Input

Used to start logging or as a counter

Maximum count: 65,535 per sample period

Maximum frequency: 32,768 Hz

Start Options

Programmable delay period: 10 min to 1 year

Start on external magnet swipe

Start on event trigger

Channel Indicators

8 green LEDs to indicate logging status, changing to red to indicate

alarm condition

Comms Indicators

1 yellow LED to indicate comms activity

Sample Rate

1 second to 24 hours for all channels

Display

Optional 3.5 digit LCD with channel indication and low battery warn-

ing

Communication Interface

USB isolated (5-pin mini USB connector)

Sample Method: Selectable

Point, Averaging, Maximum, Minimum