FD0252f

FD0256f

Smart motor driver with embedded Hall sensor

This datasheet contains new product information. Feeling Technology reserves the rights to modify the product specification without notice.

No liability is assumed as a result of the use of this product. No rights under any patent accompany the sales of the product.

Rev1.3 Dec. 18, 2008

P.1

FEELING

TECHNOLOGY

Features

Motor driver with integrated Hall sensor

High current driving capability

Lock-shutdown protection & auto-restart function

Built-in RD(rotation detection) signal output

“Soft-switch” phase-switching technique to reduce vibration and acoustic noise

Thermal shutdown protection

PWM speed control(only available for FD0256f)

Available in both TS825(FD0252f) and TS826(FD0256f) packages

General Description

FD0252f/FD0256f is a single coil motor driver with embedded Hall sensor. It integrates the motor driver with the Hall

sensor, which simplifies the PCB(printed circuit board) design and make the fabrication of small-size motors

possible.

Lock-shutdown and auto-restart function keeps the motor from being over-heated and restarts the motor after being

locked.

FD0252f/FD0256f is built-in the signal output of rotation detection function, the system could detect the rotation

status from this signal of motor when using FD0252f/FD0256f.

“Soft-switch” phase-switching technique is used to reduce the vibration and acoustic noise.

Thermal-shutdown protection ensures the motor driver to operate under specified temperature ranges.

All the protection mechanisms mentioned above combine to provide a complete protecting scenario for the motor

system, keep the motor system from possible damages and guarantee correct operations.

Block Diagram

Figure.1

Halogen

Free

Bias Generator

Coil Driver

Oscillator

Hall Plate

Reset

Power-On

Digital control logics

Chopper amplifier

PWM control