M50FLW080A datasheet(36/64 Pages) STMICROELECTRONICS

36 / 64 page

Firmware Hub/low-pin-count (FWH/LPC) interface Configuration Registers

M50FLW080A,

36/64

6.1.3

Lock Down

The Lock Down Bit provides a mechanism for protecting software data from simple hacking

and malicious attack. When the Lock Down Bit is set, ‘1’, further modification to the Write

Lock, Read Lock and Lock Down Bits cannot be performed. A reset, or power-up, is required

before changes to these bits can be made. When the Lock Down Bit is reset, ‘0’, the Write

Lock, Read Lock and Lock Down Bits can be changed.

In LPC mode, a most significant nibble, F, must be added to the memory address. For all registers, A22=0,

and the remaining address bits should be set according to the rules shown in the ADDR field of Table 6 to

Table 9.

Table 15.

Configuration Register map

Mnemonic

Memory

Address

Default

Value

Access

Lock Registers (For details, see Appendix A)

GPI_REG

Firmware Hub/Low Pin Count (FWH/LPC)

General Purpose Input Register

FBC0100h

N/A

MANU_REG

Manufacturer Code Register

FBC0000h

20h

Table 16.

Lock Register bit definitions

Bit

Bit Name

Value

Function(1)

Applies to the registers that are defined in Table 34 and Table 35.

7-3

Reserved

Read-Lock

‘1’

Bus Read operations in this Block or Sector always return 00h.

‘0’

Bus read operations in this Block or Sector return the Memory Array

contents. (Default value).

Lock-Down

‘1’

Changes to the Read-Lock bit and the Write-Lock bit cannot be

performed. Once a ‘1’ is written to the Lock-Down bit it cannot be

cleared to ‘0’; the bit is always reset to ‘0’ following a Reset (using RP

or INIT) or after power-up.

‘0’

Read-Lock and Write-Lock can be changed by writing new values to

them. (Default value).

0Write-Lock

‘1’

Program and Erase operations in this Block or Sector will set an error

in the Status Register. The memory contents will not be changed.

(Default value).

‘0’

Program and Erase operations in this Block or Sector are executed

and will modify the Block or Sector contents.

M50FLW080A Datasheet(PDF) 36 Page - STMicroelectronics

M50FLW080A Datasheet(HTML) 36 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL