Technical Data DS41206

Effective May 2017

Supersedes August 2006

Product features

41206ESDA

ESD suppressor four-channel

•

The best ESD protection for high frequency, low

voltage applications.

•

Protects up to 4 separate lines with one device

•

Exceeds testing requirements outlined in IEC

61000-4-2

•

Extremely low capacitance

•

Very low leakage current

•

Fast response time

•

Bi-directional

•

Surface mount

•

Solder termination

•

RoHS compliant

Device marking

ESDA devices are marked on the tape and reel

packages, not individually. Since the product is bi-

directional and symmetrical, no orientation marking is

required.

Device application

ESDA family are applicable to most signal line circuits. It is applied

in a shunt-connected manner. They are not suitable for use on

lines where lighting or load-switching transients are present.

ESDA family is ideal for use in computers and computer-related

equip-ment, such as modems, keyboards, and printers. ESDA

family is also well suited for portable electronic equipment such

as mobile telephones, test equipment, and card scanners.

Processing recommendations

ESDA family currently have a convex profile on the top surface of

the part. This profile is a result of the construction of the device.

They can be processed using standard pick – and – place

equipment. The placement and processing techniques for ESDA

family are similar to those used for chip resistors and chip

capacitors.

The Location in the circuit for the ESDA family has to be carefully

determined. For the better performance of the device, the device

should be positioned as close to the signal input as possible and

ahead of any other component.

P

art Numbering

41206

ESD

A

-TR1

Device

Packaging Options

Conguration

PolySurg™

Device

Device Characteristics

Designator

A = Standard

Note: Spacing in part number is shown for clarity only. Device part number contains no spaces (e.g.41206ESDA-TR1)

-TR1 = (standard) 5,000 pcs, tape-and-reel

-SP1 = (samples) 10 pcs on tape, in bag

Part Ratings and Characteristics:

Notes:

Performance Characteristics

Units

Min

Typ

Max

1. The product is 100% tested for 30V operating voltage at 25°C.

Continuous operation with higher than 12VDC under extreme

temperature and humidity may cause increasing leakage cur-

rent and/or shifting device resistance. However, even under

severe environmental test, characteristics of the device did not

change up to 12VDC operation.

Some shifting in characteristics may occur when tested over

several hundred ESD pulses at very rapid rate of 1 pulse per

second or faster.

Continuous operating voltage

VDC

-

-

V

-

35

60

V

150

300

2.

kV

-

8

15

Capacitance (@ 1 KHz ~ 1.8GHz)

pF

-

0.15

1

Leakage current (@ 12 VDC)

nA

100

A

-

30

45

Operating temperature

°C

-40

+25

+105

# pulses

20

-

45A ESD pulse. Device ratings are given at 8kV per Note 1,

unless otherwise specied.

3. Per IEC 61000-4-2, 30A @ 8kV, level 4, clamp measurement

made 30 ns after initiation of pulse, all tests in contact dis-

charge mode.

4. Trigger measurement made using Transmission Line Pulse

(TLP) method.

5. PolySurg™ devices are capable of withstanding up to a 15 kV,