GPL191C

© Generalplus Technology Inc.

Proprietary & Confidential

13

Mar. 08, 2010

Version: 1.1

8.2. 1024 Points LCD Driver, 64 Segments × 16 Commons

Note1: IOCD3 – 0 can be mask-option for segment 63 – 60.

Note2: These capacitors must be connected if voltage doubler and voltage regulator are used.

Note3: Wire route path from capacitors (C6 – 1) to chip should be as close as possible.

Note4: If voltage doubler and voltage regulator are not used, VLCD should be connected to VDD.

Note5: C7, C8 and crystal should be placed as close as possible to X32I and X32O. A shielding by ground is suggested.

Note6: The value of C7 and C8 are for design guidance only. Different capacitor values may be required for different crystal/resonator used.

Note7: The capacitor value of C1 is from 30pF to 200pF, according to system noise level.