LM193 datasheet(15/15 Pages) ARTSCHIP

15 / 15 page

LM193/LM293/LM393/LM2903

www.artschip.com

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

DIMENSIONS ARE IN MILLIMETERS

LAND PATTERN RECOMMENDATION

NOTE: UNLESS OTHERWISE SPECIFIED

EPOXY COATING

2.636n/37Pb EUTECTIC BUMP

RECOMMEND NON-SOLDER MASK DEFINED LANDING PAD.

PIN A1 IS ESTABLISHED BY LOWER LEFT CORNER WITH RESPECT TO TEXT ORIENTATION REMAINING PIN ARE NUMBERED

COUNTERCLOCKWISE.

XXX IN DRAWING NUMBER REPRESENTS PACKAGE SIZE VARIATION WHERE X1 IS PACKAGE WIDTH,X2 IS PACKAGE LENGTH AND X3

IS PACKAGE HEIGHT.

REFERENCE JEDEC REGISTRATION MO-211, VARIATION BC.

8-Bump (12 mil) micro SMD Package

Ns Package TLA08AAA

X1 = 1.514mm

X2 = 1.514mm

X3 = 0.600mm

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE

EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:

Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or

sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can

be reasonably expected to result in a significant injury to the user.

A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to

cause the failure of the life support device or system, or to affect its safety or effectiveness.

LM193 Datasheet(PDF) 15 Page - ARTSCHIP ELECTRONICS CO.,LMITED.