www.panduit.com

specifications

The vertical cable manager shall consist of a metal backbone with cable

management fingers that align with EIA rack spacing. The fingers shall

be molded out of plastic and provide integral bend radius control

throughout the entire length. The backbone shall have pass through

holes for front to back cabling, with the option to blank off with a plug.

The manager shall accept a metal, hinged, push-to-close door that can

open to the right or left. The door support brackets shall be integrated

into the manager with no assembly required. The manager shall accept

plastic slack management spools that can be repositioned as required.

The vertical panel shall be able to manage all the cable on the rack

without the aid of horizontal cable managers.

SPECIFIC A TION SHEET

Vertical Cable Managers w/doors –

6.5 foot

Dual-sided with two doors:

6" wide:

PR2VD0679

12" wide:

PR2VD1279

Dual-sided with one door:

6" wide:

PR2VSD0679

12" wide:

PR2VSD1279

Single-sided with one door:

6" wide:

PR2VFD0679

12" wide:

PR2VFD1279

Standard EIA Racks – 6.5 foot

2 post rack:

R2P79

4 post rack:

R4P79

4 post rack:

R4PCN79

Vertical Cable Managers w/doors – 7 foot

Dual-sided with two doors:

6" wide:

PR2VD06^

8" wide:

PR2VD08^

10" wide:

PR2VD10^

12" wide:

PR2VD12^

Dual-sided with one door:

6" wide:

PR2VSD06^

8" wide:

PR2VSD08^

10" wide:

PR2VSD10^

12" wide:

PR2VSD12^

Single-sided with one door:

6" wide:

PR2VFD06^

8" wide:

PR2VFD08^

10" wide:

PR2VFD10^

12" wide:

PR2VFD12^

Vertical Cable Managers w/doors – 8 foot

Dual-sided with two doors:

6" wide:

PR2VD0696^

8" wide:

PR2VD0896^

10" wide:

PR2VD1096^

12" wide:

PR2VD1296^

Dual-sided with one door:

6" wide:

PR2VSD0696^

8" wide:

PR2VSD0896^

10" wide:

PR2VSD1096^

12" wide:

PR2VSD1296^

Single-sided with one door:

6" wide:

PR2VFD0696^

8" wide:

PR2VFD0896^

10" wide:

PR2VFD1096^

12" wide:

PR2VFD1296^

Standard EIA Racks – 7 foot

2-Post aluminum rack with #12-24

threaded rails:

R2P*^

4-Post steel rack with #12-24

threaded rails:

R4P*^

4-Post steel rack with cage

nut rails:

R4PCN*^

Accessories

7" front slack management

spool:

PRSP7

5" rear slack management

spool:

PRSP5

End panel:

PR2VEP*^

Cable retainer:

WR5E-X

Waterfall for use with 2-post rack

and PR2V managers:

R2PPR2VWF^

Waterfall for use with R4P 4-post rack

and PR2V managers:

R4PPR2VWF^

Pass-through hole blanking plugs

(kit of five plugs):

PR2VBPK

Pass-through bend radius grommets

(Kit of five grommets):

PR2VGK

*For part numbers 8 feet tall, add "96" to end of part number.

Ex: PR2VEP96 or R2P96

^For part numbers in white, add "WH" to end of part number.

Ex: PR2VD06WH or R2PWH

applications

designed to manage high-density networking

equipment in, up to, half the area required by

traditional cable management systems. Molded

cable management fingers, with integral bend

radius control, combine with Panduit angled

patch panels to eliminate the need for

horizontal cable managers.This frees up rack

space for additional patch panels, active

equipment, or cable pathways reducing the

number of racks that may be required for the

network layout. The reduction in square footage

combined with fewer components ordered,

inventoried and installed results in significant

cost savings for the network infrastructure.

When used with Panduit connectivity, patch

cords, and racks, the user receives a complete

cable management solution that maximizes

density while minimizing the area required for

their network.

key features and benefits

NEW Improved door function

“Push-to-close” door design allows for easy operation

NEW Dual hinged doors are

included

Doors ship with managers, simplifying ordering process with

less packaging waste

NEW Integrated door

brackets

No brackets to install; faster installation while reducing labor

costs

NEW Color options

Managers and doors are available in black and white

NEW High Density with

increased cable capacity

Up to 17% more usable capacity over existing PRV

Vertical Managers

Curved fingers

Support cables as they transition to vertical pathway eliminating

need for horizontal managers

Individual fingers

Aligns with rack spaces to simplify cable routing changes

Integral bend radius control

Maintains cable bend radius ensuring network performance and

system reliability

Optional snap on vertical

retainers

Can be placed on fingers to help retain cables in channel for

improved cable management and appearance

Optional slack management

spools

Organize and manage patch cord slack allowing for

standardization of patch cord lengths