Electronic Components Datasheet Search
  English  ▼

X  

SVRTR2805S/K Datasheet(PDF) 9 Page - VPT, Inc.

Part # SVRTR2805S/K
Description  SPACE QUALIFIED HYBRID DC-DC CONVERTERS
PDF  15 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  VPT [VPT, Inc.]
Direct Link  https://www.vptpower.com/
Logo VPT - VPT, Inc.

SVRTR2805S/K Datasheet(HTML) 9 Page - VPT, Inc.

Back Button SVRTR2805S/K Datasheet HTML 5Page - VPT, Inc. SVRTR2805S/K Datasheet HTML 6Page - VPT, Inc. SVRTR2805S/K Datasheet HTML 7Page - VPT, Inc. SVRTR2805S/K Datasheet HTML 8Page - VPT, Inc. SVRTR2805S/K Datasheet HTML 9Page - VPT, Inc. SVRTR2805S/K Datasheet HTML 10Page - VPT, Inc. SVRTR2805S/K Datasheet HTML 11Page - VPT, Inc. SVRTR2805S/K Datasheet HTML 12Page - VPT, Inc. SVRTR2805S/K Datasheet HTML 13Page - VPT, Inc. Next Button
Zoom Inzoom in Zoom Outzoom out
 9 / 15 page
background image
Sales Information
Phone:(425) 353-3010
Fax: (425) 353-4030
SVRTR2800S - 8.0
E-mail: vptsales@vptpower.com
Web: www.vptpower.com
Page 9
SVRTR2800S Series
6.2.2 Adjusting the Output Voltage (+S)
The output voltage set point of the converter can be adjusted using the +S pin.
To adjust the output up, connect the trim resistor from +S to OUTCOM. The
maximum trim range is +10% from nominal. The appropriate resistor values
versus the output voltage are given in the table below. Because the +S pin can
be sensitive to external noise, the trim resistor should be located close to the
SVRTR converter with short interconnects. When adjusting the output voltage,
do not exceed the rated total output power or output current. The –S pin should
be connected to the OUTCOM pin.
SVRTR283R3S
SVRTR2805S
SVRTR2812S
SVRTR2815S
+Vout (V)
Rtrim (Ω)
+ Vout (V)
Rtrim (Ω)
+ Vout (V)
Rtrim (Ω)
+ Vout (V)
Rtrim (Ω)
3.60
1.13k
5.50
1.05k
13.2
1.09k
16.50
1.09k
3.55
1.36k
5.45
1.18k
13.1
1.19k
16.40
1.18k
3.50
1.72k
5.40
1.33k
13.0
1.33k
16.30
1.28k
3.45
2.32k
5.35
1.54k
12.9
1.49k
16.20
1.4k
3.40
3.59k
5.30
1.82k
12.8
1.7k
16.10
1.54k
3.35
7.87k
5.25
2.22k
12.7
1.98k
16.00
1.71k
3.30
5.20
2.86k
12.6
2.38k
15.90
1.94k
5.15
4k
12.5
2.96k
15.80
2.22k
5.10
6.67k
12.4
3.94k
15.70
2.61k
5.05
20k
12.3
5.86k
15.60
3.16k
5.00
12.2
11.4k
15.50
4k
12.1
242k
15.40
5.46k
12.0
15.30
8.57k
15.20
20k
15.10
Note 1
15.00
1. Connect Rtrim = 400Ω from +VOUT (PIN 5) to +S (PIN 6)
6.2.3 Remote Sense (+S, -S)
Remote sensing compensates for voltage drops in the output pins and traces by sensing and regulating directly at the load. The remote
sense function can compensate for up to a 10% voltage drop (5% in the positive lead and 5% in the negative lead). The sum of the
TRIM up and remote sense compensation cannot exceed 10% such that the voltage at the output terminals of the converter does not
exceed 110% of the nominal output voltage. If not used, the user should connect +S to +VOUT and –S to OUTCOM at the pins of the
converter.
6.2.4 Frequency Synchronization (SYNC)
The SVRTR2800S Series will free run at a switching frequency of approximately 525 kHz, which has been set for optimum converter
performance. Frequency synchronization is not necessary unless required by system constraints. The SVRTR2800S Series provides a
frequency synchronization input (SYNC) referenced to INCOM.
The SYNC pin can be driven by an external clock. The internal clock and internal power train will operate at the frequency applied to the
SYNC pin. The SYNC pin should be driven with a TTL type 5 V square wave signal. The duty cycle of the square wave should be
between 20% and 80%. The SYNC pin is internally capacitively-coupled and the internal load is equivalent to 220 pF. Proper layout
and circuit techniques are necessary to prevent noise from being injected into this pin. Synchronized converters should be located
physically close together and share a low impedance INCOM connection. The SYNC pin can be left open or connected to INCOM if not
used.
+
-
+
-
2.5V
Ri
100
10K
100
+VOUT
5
+S
6
-S
3
OUTCOM
4
Rtrim



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com