-

Pasternack does not make

any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation.

1

Configuration

• Connector 1: M39012/16-0014(BNC Male)

• Connector 2: M39012/03-0503(N Female Bulkhead)

• Cable: M17/60-RG142

Features

• Max Frequency 4 GHz

• 69.5% Phase Velocity

• Double Shielded

• FEP Jacket

• Lot Traceability

• J-STD-Soldering

•

Qualified (QPL) cable and connectors

• RF Test Plots

• Test Report

• In stock and ready to ship

Applications

• Hi-Rel

• MIL-DTL-17 Requirements

• Avionics

• IFF

• SATCOM

• ECM

.

Description

Pasternack’s MIL-DTL-17 cable assemblies are part of our full line of reliable RF components available for same-day ship-

ping. These commercial-off-the-shelf (COTS), military grade cable assemblies are designed and processed with high reli-

ability in mind. MIL-PRF-39012 connectors and MIL-C-17 coaxial cable are assembled using J-STD soldering processes and

WHMA-A-620 workmanship criteria. The combination of materials, processing and acceptance testing work together to create

a dependable cable assembly for applications where performance over time is important or the cost of failure is high. Each

finished MIL-DTL-17 cable assembly is traceable to its component lots and a test report is available for every lot produced.

Our MIL-DTL-17 cable assembly datasheet specifications and drawing with dimensions are shown below in this PDF.

Pasternack’s broad catalog of RF, microwave and millimeter wave cable assemblies allow designers to configure and cus-

tomize their signal connections however they like. Whether the need is to provide reliable mil-spec connections or fielding

dependable RF cable assemblies, Pasternack has the right cable assemblies for the job. Pasternack can also expertly build

your custom cable assemblies for you and ship same day.

Referenced Specifications

IPC/WHMA-A-620

Requirements and Acceptance for Cable and Wire Harness Assemblies

MIL-DTL-17

Cables, Radio Frequency, Flexible and Semirigid, General Specification for

MIL-STD-348

Radio Frequency Connector Interfaces for MIL-DTL-3643, MIL-DTL-3650, MIL-DTL-3655, MIL-

DTL-25516, MIL-PRF-31031, MIL-PRF-39012, MIL-PRF-49142, MIL-PRF...

MIL-PRF-39012

Connectors, Coaxial, Radio Frequency, General Specification for

IPC J-STD-001

Requirements for Soldered Electrical and Electronic Assemblies

IPC J-STD-006

Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for

Electronic Soldering Applications

SAE AS5942

Marking of Electrical Insulating Materials

SAE AS23053

Insulation Sleeving, Electrical, Heat Shrinkable, General Specifications For

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/60-RG142 Coax PE3M0004

PE3M0004 REV 1.1

MIL-DTL-17 BNC Male to N Female Bulkhead

Cable Using M17/60-RG142 Coax

RF Cable Assemblies Technical Data Sheet

PE3M0004