www.cherryswitches.com

Page 1 of 2, Last update 2016-01-05, Specifications subject to change without notice.

Magnetic Proximity Sensors (Hall Effect)

MP1013 Sensors

Hall-effect position sensor with convenient snap-fit mounting

Description

The MP1 Series sensors are one-piece non-contact solid-state position sensors. The sensors operate through the use of Hall Effect

technology with magnetic fields generated by permanent magnets. They provide a sinking current output.

Features

Typical Applications

•

Solid state reliability

•

Stable output over operating temperature range

•

Open collector (NPN) output can be used with bipolar or CMOS

logic circuits with suitable pull-up resistor

•

South pole sensitive

•

Unipolar device (MP101301, MP101302)

•

Latching version available (MP101303)

•

RoHS compliant

•

Fastener-less design

•

IP67

•

Door position & interlock

•

Limit switch

•

Flow/speed

•

Home security

•

Pedal switch

Environmental Specifications

Operating / Storage Temperature (MP101301, MP101303)

-40 °C to 85 ⁰C (-40 ⁰F to 185 ⁰F)

Operating / Storage Temperature (MP101302)

-40 ⁰C to 125 °C (-40 ⁰F to 257 ⁰F)

Ingress Protection

IP67

Electrical Specifications

Operating Supply Voltage

5 to 24 VDC

Supply Current (MP101301, MP101302)

4.1 mA typ., 7.5 mA max.

Supply Current (MP101303)

2.6 mA typ., 5 mA max.

Output Current (Sink) (MP101301, MP101302)

25 mA max.

Output Current (Sink) (MP101303)

20 mA max.

Maximum Input Voltage (MP101301, MP101302)

30 VDC

Maximum Input Voltage (MP101303)

28 VDC

Maximum Reverse Voltage (MP101301, MP101302)

30 VDC

Maximum Reverse Voltage (MP101303)

None

Recommended Pull-Up Resistor

See chart

Mechanical Specifications

Housing Material

Glass-reinforced nylon plastic

Turn on / off (MP101301, MP101302)

245 Gauss / 60 Gauss

Turn on / off (MP101303)*

60 Gauss / 60 Gauss

*MP101303 is a latching sensor and releases when 60 Gauss is applied to the north pole