SMB30FVK

•

V-clamp, flat bracket and

fasteners for mounting to pipe

or extensions

•

Clamp accommodates 28 mm

dia. tubing or 1 in. square

extrusions

•

30 mm hole for mounting

sensors

46

118

A

Hole size: A= ø 31

SMB30MM

•

12-ga. stainless steel bracket

with curved mounting slots for

versatile orientation

•

Clearance for M6 (¼ in)

hardware

•

Mounting hole for 30 mm

sensor

70

57

A

B

C

57

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

SMB30RAVK

•

V-clamp, right-angle bracket

and fasteners for mounting

sensors to pipe or extrusion

•

Clamp accommodates 28 mm

dia. tubing or 1 in. square

extrusions

•

30 mm hole for mounting

sensors

90

A

57

46

Hole size: A = ø 30.5

SMB30SC

•

Swivel bracket with 30 mm

mounting hole for sensor

•

Black reinforced thermoplastic

polyester

•

Stainless steel mounting and

swivel locking hardware

included

67

58

29

B

A

Hole center spacing: A=ø 50.8

Hole size: A=ø 7.0, B=ø 30.0

SMBAMS30P

•

Flat SMBAMS series bracket

•

30 mm hole for mounting

sensors

•

Articulation slots for 90°+

rotation

•

12-ga. 300 series stainless steel

45

93

A

C

B

Hole center spacing: A=26.0, A to B=13.0

Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0

SMBAMS30RA

•

Right-angle SMBAMS series

bracket

•

30 mm hole for mounting

sensors

•

Articulation slots for 90°+

rotation

•

12-ga. (2.6 mm) cold-rolled steel

53

48

45

A

C

B

Hole center spacing: A=26.0, A to B=13.0

Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0

TC-K50-CL

• Touch cover

Ø A

B

Diameter: A = 67 mm

Height: B = 42.5 mm

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or

replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover

damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY

OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT

DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously

manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the

product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the

product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time.

Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:

www.bannerengineering.com.