Datasheet

Light Screen for Error-Proofing of Bin-Picking Operations

• Compact package, available in 4 lengths to fit many sizes and configurations of existing parts bins

• Range up to 2 m (6.5 ft)

• Two-component system (asynchronous emitter and receiver) needs no sync wire or controller box.

• Emitters and receivers sold separately or in pairs for easy ordering.

• Two LEDs on each emitter and receiver indicate proper setup and system errors.

• Clearly visible green job indicator lights mounted on either side of emitter and receiver housings; the

light can be remotely controlled to initiate user action with a solid ON or blinking condition

• Two frequency settings to prevent crosstalk in close-proximity, multiple-array installations

• Easy DIP-switch selection of light/dark operate, solid/flashing job light, A/B frequency, and gate

polarity for activating the job light indicator.

• Choose 2 m (6.5 ft) unterminated cable or 2 m (6.5 ft) cable with 4-pin Euro-style quick-disconnect

connector.

• PNP or NPN receiver output, depending on model

• 12 to 30V dc operation

• Minimum resolution 35 mm (1.4 in)

• Wide beam pattern for easy alignment

• Heavy-duty protective brackets available

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or

death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety

applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.

Models

NOTE: Additional models on the next page.

NOTE: Cable diameter is 3.3 mm (0.13 in) on all models.

Description

Array Length / #

Beams

Receiver Output

PVA100N6

Emitter/Receiver Pair

100 mm (4 in) Long, 5

Beams

0V dc

NPN (Sinking)

PVA100N6E

Emitter

PVA100N6R

Receiver

PVA100P6

Emitter/Receiver Pair

+5 to 30V dc

PNP (Sourcing)

PVA100P6E

Emitter

PVA100P6R

Receiver

PVA225N6

Emitter/Receiver Pair

225 mm (9 in) Long, 5

Beams

0V dc

NPN (Sinking)

PVA225N6E

Emitter

PVA225N6R

Receiver

PVA225P6

Emitter/Receiver Pair

+5 to 30V dc

PNP (Sourcing)

PVA225P6E

Emitter

PVA225P6R

Receiver

PVA300N6

Emitter/Receiver Pair

300 mm (12 in) Long, 13

Beams

0V dc

NPN (Sinking)

PVA300N6E

Emitter

PVA300N6R

Receiver

1 Only cabled models (2 m (6.5 ft) unterminated integral cable) are listed. For 2 m (6.5 ft) pigtail with Euro-style Quick-disconnect fitting, add "Q" to the

model number (for example, PVA100N6Q).

2 See Configuration on page 4

PVA Pick-to-Light Array

Original Document

52088 Rev. F

12 September 2016

52088