1

Wire-to-wire/Sealed connector

Wire-to-wire/Sealed connector

Compliant with the ISO 19689, 0.64 mm individual

waterproof, 6 pole wire to wire connection connector.

The retainer is a pre-set type for both female and male

housing.

Protection cover to female connector from water and

dust is selectable to the installation direction.

Compliant with the ISO19689 which is the Motorcycle OBD

standard connector.

Individual sealed connector with 0.64 mm terminal,

3.0 mm X 3.0 mm pitch.

Simple assemble harnesses, due to there is no necessity to

add retainer afterwards.

The protection cover is designed to set the connector in a

vertical or horizontal direction on a bracket of the body with

using a clip structure.

¡Temperature range: -40 C to +105 C

(including temperature rise in applying

electrical current)

¡Insulation resistance: 100 M

min.

¡Withstanding voltage: 1,000 VAC/minute

¡Applicable wire: AVSS

∗ Compliant with ELV/RoHS2.

∗ Contact JST for details.

Features

Specifications

*1. Temperature 20

5 C (full circuits)

*2. Temperature 20

5 C (single circuit)