Discover - A waveform capture rate of 5,000 wfm/s maximizes the probability of capturing

elusive glitches and other infrequent events.

Capture

Discovering a device fault is only the first step. Next, you must capture the

event of interest to identify root cause.

The MSO/DPO2000B Series provides a complete set of triggers - including

runt, logic, pulse width/glitch, setup/hold violation, serial packet, and

parallel data - to help quickly find your event. With up to a 1 Mpoint record

length, you can capture many events of interest, even thousands of serial

packets, in a single acquisition for further analysis while maintaining high

resolution to zoom in on fine signal details.

From triggering on specific packet content to automatic decode in multiple

data formats, the MSO/DPO2000B Series provides integrated support for a

UART. The ability to decode up to two serial and/or parallel buses

simultaneously means you gain insight into system-level problems quickly.

To further help troubleshoot system-level interactions in complex

embedded systems, the MSO2000B Series offers 16 digital channels in

addition to its analog channels. Since the digital channels are fully

integrated into the oscilloscope, you can trigger across all input channels,

automatically time-correlating all analog, digital, and serial signals.

Capture - Triggering on a specific transmit data packet going across an RS-232 bus. A

complete set of triggers, including triggers for specific serial packet content, ensures you

quickly capture your event of interest.

Search

Finding your event of interest in a long waveform record can be time

consuming without the right search tools. With today's record lengths

pushing to a million data points, locating your event can mean scrolling

through thousands of screens of signal activity.

The MSO/DPO2000B Series offers the industry's most comprehensive

search and waveform navigation with its innovative Wave Inspector

®

controls. These controls speed panning and zooming through your record.

A unique force-feedback system lets you move from one end of your record

to the other in just seconds. You can mark any location you may want to

reference later for further investigation, and automatically search the record

using criteria that you define. Wave Inspector will instantly search your

entire record, including analog, digital, and serial bus data. Along the way, it

will automatically mark every occurrence of your defined event so you can

quickly move between events.

50. Wave Inspector controls provide unprecedented efficiency in viewing and navigating

waveform data.

Analyze

Verifying that your prototype's performance matches simulations and meets

the project's design goals requires analyzing its behavior. Tasks can range

from simple checks of rise times and pulse widths to sophisticated power

loss analysis and investigation of noise sources.

The MSO/DPO2000B Series offers a comprehensive set of integrated

analysis tools including waveform- and screen-based cursors,

29 automated measurements, and FFT analysis. Specialized application

support for serial bus analysis is also available.

Analyze - FFT analysis of a pulsed signal. A comprehensive set of integrated analysis

tools speeds verification of your design's performance.

Datasheet

2 www.tek.com