www.bkprecision.com

Multi-Range Programmable DC Power Supplies

9115 Series

3

The power supply output voltage and current

can be controlled from zero to full range by

either external DC voltage sources (0-5 V or 0-

10 V) or resistances (0-5 k

Ω or 0-10 kΩ). The

DB25 analog control interface also provides a

source for monitoring the voltage and current

output.

Parallel Configuration

Series Configuration

• Remote monitoring on iOS, Android or Windows 8 compatible tablets or smart phones via NI Data Dashboard for LabVIEW apps. Quickly develop a custom

dashboard consisting of one (smart phone) or several (tablet) indicators, charts or gauges to monitor your power supply.

• Log voltage, current and power values as well as time stamp, CV/CC and output status.

• Save and load list files to/from the power supply’s internal memory.

• Create an unlimited number of external list files to be executed from PC memory. Save and recall list files to/from the PC.

Application software

Master/Slave operation

External analog control interface

More than one unit of the same power supply

model can be connected in parallel or series

connection to increase the overall current or

voltage output respectively. Using the RS-485

interface, the power supplies can operate in

master/slave mode. In this mode, the master unit

can control all other power supplies connected

in parallel or series. Additionally, the RS-485

interface can be used for multi-unit control of

up to 31 daisy chained units.

The power supply is capable of programming the

slope of the output voltage during changes

between voltage settings by allowing users to set

the rising and falling edge times of the voltage.

The list mode feature lets users store, recall, and

run program sequences in the power supply’s

internal memory. A total of 10 steps can be

configured for each sequence (up to 10). These

sequences can then be saved into a program

configuration that can run one sequence after

another, which allows for a maximum of 100

steps in one program configuration.

Programmable voltage rise/fall times

Test sequence execution in list mode

(models 9115, 9115-AT, and 9116 only)

Easy-to-use interface

The numeric keypad, rotary knobs, and cursors

provide an easy way to set output levels quickly

and precisely. With a push of a button, the

display can be conveniently toggled between set

and measured voltage and current values.

Additionally, the power supplies provide internal

memory for storage of up to 100 different

instrument settings that can be set and recalled

via both the front panel and remote interfaces.

Flexible operation

PC software is provided for front panel emulation, generating and executing test sequences or logging measurement data without the need to write source code.

Additionally, this application software integrates with NI Data Dashboard for LabVIEW apps which allows users to create a custom dashboard on a tablet computer

or smart phone to remotely monitor 9115 Series power supplies via this PC software.