6. PARAMETER SETTING

UP

UP

UP

UP

UP

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

■

Parameter entering mode

●

℃ or ℉ temperature display selection

1. Either

or

will be displayed if you press the

button when

is displayed.

2.

and

will be switched alternately if you press the

button.

3. The display will return to

if you press the

button after selecting.

●

Low temperature error setting

1. Press the

button to change the display to

.

2. The low-limit temperature will be displayed if you press the

button. Enter the value in the same

manner as setting the temperature in the normal mode [5. OPERATION ●The normal mode]

3. The display will return to

if you press the

button after setting.

●

Setting mode selection

1. Press the

button to change the display to

.

2. If you press the

button, the display will move to the setting mode selection screen. If you press

the

button,

(The normal mode) and

(The preset mode) will be switched alternately.

3. The display will return to

if you press the

button after selecting.*

* If you select the preset mode, the display will move to the preset selection screen.

4.The number of active preset will be displayed If you press the

button at 3.

(Example : If the number is three,

is displayed.)

5. Press the

button to change the value and select the number of active preset you required.

The unit will accept values from 2 through 5.

6. The display will return to

if you press the

button after selecting.