Programmable AC Power Source

9830 Series

3

www.bkprecision.com

Flexible operation

Adjustable AC/DC voltage levels, frequency and timing parameters allow for simulation of voltage drops and periodic power surges and sags. Step, pulse and list

modes are used to generate complex power line disturbance simulations. Select from built-in waveforms or generate user-defined waveforms with the included PC

software or by connecting an arbitrary waveform generator to the instrument’s analog input.

Generate step-up or step-down output based

on user-defined voltage, frequency, phase, and

interval settings.

Step mode

List mode supports the generation of complex

output sequences with varying time, amplitude,

frequency, and voltage. Up to 100 steps in 10

programs can be saved and executed. This

allows the user to build a wide range of

waveforms to simulate power grid faults and

disturbances.

List mode

Pulse mode allows the generation of single or

multiple pulses with user defined voltage, duty

cycle, and phase. Either AC or DC (-424.0 to

+424.0 V) output operation is supported.

Pulse mode

Select sine, square, clipped sine or harmonic distortion waveforms. Set amplitude, frequency and phase.

Waveform operations

The 9830 Series is capable of generating AC+DC waveforms. When operating in pulse, step and list

mode, the AC signal can be combined with either a positive or negative DC offset voltage, allowing users

to create a wide range of waveforms.

Examples of DC offset

DC offset

Select from 30 built-in THD (total harmonic distortion) waveforms

Built-in THD Waveforms

THD

29

THD

15

THD

00