Express-HLE

Features

●

Chipset

●

Up to 16GB Dual Channel ECC DDR3L at 1600MHz

●

Three DDI ports support 3 independent displays

●

Seven PCIe x1, one PCIe x16

●

GbE, four SATA 6 Gb/s, four USB 3.0 and four USB 2.0

●

●

Extreme Rugged operating temperature: -40°C to +85°C

(build option)

Specifications

CPU

i7-4700EQ 2.4 GHz (3.4 GHz Turbo), 47W (4C/GT2)

i5-4400E 2.7 GHz (3.3 GHz Turbo), 37W (2C/GT2)

i5-4402E 1.6 GHz (2.7 GHz Turbo), 25W (2C/GT2)

i3-4100E 2.4 GHz (no Turbo) 3MB, 37W (2C/GT2)

i3-4102E 1.6 GHz (no Turbo) 3MB, 25W (2C/GT2)

i7-4860EQ 2.4 GHz (3.2 GHz Turbo), 47W (4C/GT3)

TSX.

Note: Availability of the features may vary between processor SKUs.

Memory

Dual channel with ECC 1600/1333 MHz DDR3L memory up to 16GB in dual

SODIMM socket

Embedded BIOS

L3 Cache

6MB for i7-4700EQ, 3MB for i5-4400E, i5-4402E, i3-4100E and i3-4102E

Expansion Busses

PCI Express x16 (Gen3) or PCI Express (2 x8 or 1 x8 with 2 x4)

6 PCI Express x1 (AB): lanes 0/1/2/3/4/5

1 PCI Express x1 (CD): lane 6

SEMA Board Controller

Supports: Voltage/Current monitoring, Power sequence debug support, AT/

ATX mode control, Logistics and Forensic information, Flat Panel Control,

Control

Debug Headers

40-pin multipurpose flat cable connector

Use in combination with DB-40 debug module

Providing BIOS POST code LED, BMC access, SPI BIOS flashing, Power

Testpoints, Debug LEDs

60-pin XDP header for ICE debug of CPU/chipset

GPU Feature Support

Generation 7.5 graphics core architecture, supporting

3 independent and simultaneous display combinations of DisplayPort /HDMI

/ LVDS monitors

Encode/transcode HD content

Digital Display Interface

DDI1 supporting DisplayPort / HDMI / DVI

DDI2 supporting DisplayPort / HDMI / DVI

DDI3 supporting DisplayPort / HDMI / DVI

VGA

Analog VGA support with 300 MHz DAC

Analog monitor support up to QXGA (2048 x 1536)

LVDS

Single/dual channel 18/24-bit LVDS from eDP (two lanes)

Chipset

Audio Codec

Located on carrier Express-BASE6 (ALC886 standard supported)

Interface: 10/100/1000 GbE connection

USB: 4x USB 3.0 (USB 0,1,2,3)

4x USB 2.0 (USB 4,5,6,7)

SATA: Four ports SATA 6Gb/s (SATA0, SATA1, SATA2, SATA3)

Serial: 2 UART ports COM1/2 with console redirection

GPIO: 4 GPO and 4 GPI with interrupt

Note: “build option” indicates an alternative BOM configuration to support additional or alternative functions that are not available on the standard product.

Be aware that these “build option” part numbers will need to be newly created and this will result in production lead times.