Silicom Ltd. Connectivity Solutions

Page

4

Auto negotiation:

Auto-negotiation between Full duplex and simplex operations and between 10Mb/s 100Mb/s

speeds and duplex 1000Mb/s.

Data Transfer Rate:

1000 Mb/s, 100 Mb/s and 10 Mb/sec in simplex mode per port.

2000Mb/s 200 and 20 Mb/s in full duplex mode per port

Cables and Operating

distance:

10Base-T Category 3, 4, or 5 maximum 50m *

100Base-Tx Category 5 maximum 50m *

1000Base-T Category 5E maximum 50m *

*Theoretical Distance

– Defined as half a distance as stated by the IEEE 802.3 standard

Operating Systems Support

Operating system support:

Windows

Linux

VMware

General Technical Specifications

Interface Standard:

PCI ExpressModule Specification revision 1.0

Silicom SETAC

PCI-Express Base Specification Revision 2.1 ( 5 GTs)

Board Size:

168.2mm x 98mm (6.62”X3.858”)

PCI Express Card Type:

X4

PCI Express Voltage:

+12V ± 15%

PCI Express Connector:

Gold Finger: X8

Controller:

Intel i350AM4

I/O:

Quad RJ45 located on edge of the board

Weight:

130 gr ( 4.586 oz )

Holder:

Not included

Power Consumption:

3.96W, 0.33A at 12V: Typical all ports operate at 100MGbit/s.

3.84W, 0.32A at 12V: Typical all ports operate at 10Mbit/s.

3.00W, 0.25A at 12V: Typical Bypass Mode.

3.00W, 0.25A at 12V: Typical Disconnect Mode.

2.88W, 0.24A at 12V: Typical No link at all ports