Photodiode PR5030

Package Information

SOLDERING INFORMATION

A lead-free solder profile with a peak temper-

ature of 260°C or less, according to J-STD-020

should be followed.

Parts should be handled in accordance with the

moisture sensitivity level as indicated on the

moisture barrier bag, but at least to MSL 3.

Any parts without or with unsealed moisture

barrier bag must be dry-baked according to

JEDEC guidelines before soldering. Manual

soldering must be done with utmost care.

Direct infrared heating should be avoided; pure

convection heating is recommended.

TAPE & REEL

Reel diameter: 7“ (178 mm)

Tape width: 8 mm

Quantity per reel: 3,000

Packaging: moisture barrier bag

Orientation of ICs in tape: Pins 3 and 4 towards

sprocket holes

BARE DIES

PR5030 is available as bare dies on request on

tested and sawn wafers or in wafflepack.

Please contact us for minimum order quantities

and delivery times.

Disclaimer

Information provided by PREMA is believed to be accurate and correct. However, no responsibility is assumed by

PREMA for its use, nor for any infringements of patents or other rights of third parties which may result from its use.

PREMA reserves the right at any time without notice to change circuitry and specifications.

Life Support Policy

PREMA Semiconductors products are not authorized for use as critical components in life support devices or

systems without the express written approval of PREMA Semiconductor. As used herein:

1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,

or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for

use provided in the labeling, can be reasonably expected to result in a significant injury to the user.

2. A critical component is any component of a life support device or system whose failure to perform can be

reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

PREMA Semiconductor GmbH

Robert-Bosch-Str. 6

55129 Mainz Germany

Phone: +49-6131-5062-0

Fax: +49-6131-5062-220

Email: prema@prema.com Web site: www.prema.com

© PREMA Semiconductor GmbH 2020 I rev. 1120

Page 7/7