When replacing stationary side/quarter glass check the current Auto Glass Journal-Auto Glass Installation Guide

or the current Auto Manufacturer's Body Guide for the model being worked on. Determine the factory method of

installation used, i.e. butyl tape and/or urethane sealer/adhesive. If buytl tape was used, follow recommended

procedure for installing with butyl tape. If a urethane sealer/adhesive was used follow installation procedure using

Automix

TM

Channel Bonding and Sidelite Adhesive in place of other type adhesives. Make sure glass and metal are

clean. Apply adhesive as needed, fit glass and fixture as needed.

Because of the fast cure rate of Automix

TM

Channel Bonding and Sidelite Adhesive the car can be moved, other

work finished i.e., trip/paint or put into service in approximately one (1) hour.

If all of the Automix Channel Bonding and Sidelite Adhesive Duo-Pak was not used for the job, remove nozzle,

replace end on duo-pak and save for next job.

Cleanup:

Excess adhesive and equipment may be cleaned prior to curing with a solvent* such as 3M

TM

General Purpose

Adhesive Cleaner*.

*NOTE: When using flammable solvents, extinguish all sources of ignition in the immediate work area and

observe proper precautionary measures for handling such materials.

Applications

Stationary side glass that was factory assembled with a urethane adhesive/sealer, that needs to be removed

and/or replaced, use Automix Channel Bonding and Sidelite Adhesive to give a cured, serviceable assembly

in approximately one (1) hour compared to hours or even days for one-part sealers/adhesives and because

of the black color the O.E.M. appearance is maintained.

Storage and Handling

Store at room temperature. Rotate stock on a "first-in-first-out" basis.

When stored at the recommended conditions in original, unopened

containers, this product has a shelf life of 12 months.

Precautionary Information

Refer to Product Label and Material Safety Data Sheet for Health and Safety Information before using this product.

Country

US

This document is public. It may be distributed.

Important Notice to Purchaser

The statements and technical information contained in this technical data

sheet are based on tests and data which 3M believes to be reliable, but the

accuracy or completeness of such statements and technical information is not

guaranteed. 3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is

responsible for determining whether the 3M product is fit for a particular

purpose and suitable for user's method of application.

Federal and local air quality regulations may regulate or prohibit the use of surface preparation and cleanup solvents based on

VOC content. Consult your local and Federal air quality regulations for information. When using solvents, use in a well ventilated

area. Extinguish all sources of ignition in the work area and observe precautionary measures for handling these materials. Refer

3