3M™ Hot Melt Adhesive

3776LM • 3792LM • 3738 • 3792

Typical

Performance

Properties

Note: The following technical information and data should be considered representative or

typical only and should not be used for specification purposes.

3M™ Hot Melt Adhesive

3776LM

3792LM

3738

3792

140°F/ 60°C

140°F/ 60°C

130°F/ 54°C

140°F/ 60°C

Ball & Ring Melt

184°F/ 84°C

178°F/ 81°C

186°F/ 86°C

179°F/ 81°C

600 psi

350 psi

375 psi

250 psi

9 piw

13 piw

13 piw

13 piw

UL94 Listing

n/a

V2

V2

V2

FDA Indirect

n/a

21 CFR

175.105

21 CFR

175.105

21 CFR

175.105

(1) Highest temperature that the adhesive will support a 2 psi dead load.

(2) ASTM E28-67.

(3) Overlap shear measured on Douglas Fir to Douglas Fir.

(4) Measured in pounds per inch width (piw). Flexible canvas bonded to Douglas Fir.

(5) Permitted for indirect food contact subject to the limitations in applicable CFR section(s).

Storage

Store product below 120°F (49°C).

Shelf Life

When stored at the recommended conditions, this product has a shelf life of 2 years

after 3M ships the product to a customer or distributor.

Precautionary

Information

Refer to Product Label and Material Safety Data Sheet for health and safety information before using this

product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501

Product Use

All statements, technical information and recommendations contained in this document are based upon

tests or experience that 3M believes are reliable. However, many factors beyond 3M

’s control can affect

the use and performance of a 3M product in a particular application, including the conditions under

which the product is used and the time and environmental conditions in which the product is expected to

perform. Since these factors are uniquely within the user

’s knowledge and control, it is essential that the

user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the

user

’s method of application.

Warranty and

Limited Remedy

Unless stated otherwise in 3M

’s product literature, packaging inserts or product packaging for individual

products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the

product. Individual products may have additional or different warranties as stated on product literature,

package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF

DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product

is fit for a particular purpose and suitable for user

’s application. If the 3M product is defective within the

warranty period, your exclusive remedy and 3M

’s and seller’s sole obligation will be, at 3M’s option, to

replace the product or refund the purchase price.