| Electronic Components Datasheet Search |
|
MAX17313 Datasheet(PDF) 1 Page - Maxim Integrated Products |
|
|
|||||||||||||||||||||||||||||
MAX17313 Datasheet(HTML) 1 Page - Maxim Integrated Products |
|
1 / 41 page ![]() Evaluates: MAX17300-MAX17303/ MAX17310-MAX17313 MAX1730xX/MAX1730xG/ MAX1731xX/MAX1731xG Evaluation Kits General Description The MAX173xxX/MAX173xxG evaluation kits (EV kits) are fully assembled and tested surface-mount PCBs that evaluate the stand-alone pack-side fuel gauge IC with protector and SHA-256 authentication for 1-cell lithium- ion/polymer batteries. The EV kits include the IC evaluation board with inte- grated I2C/1-Wire® interface and USB micro-B cable. Windows®-based graphical user interface (GUI) software is available for use with the EV kits and can be down- loaded from Maxim’s website at www.maximintegrated. com/products/MAX17303 (under the Design Resources tab). Windows 7 or newer Windows operating system is required to use with the EV kit GUI software. Features and Benefits ● ModelGauge™ m5 Algorithm ● Monitors Single-Cell Packs ● Full Protection Solution On-Board for Evaluation ● Battery Pack Input Voltage Range of +2.3V to +4.9V with Default Hardware ● Default Current Range -5A to +5A, up to 10A with less than 5mΩ Sense Resistor ● Thermistor Measurement Network ● On-Board I2C/1-Wire Communication Interface ● Windows 7 or Newer Compatible Software ● Proven PCB Layout ● Fully Assembled and Tested 319-100331; Rev 4; 3/21 Ordering Information appears at end of data sheet. 1-Wire is a registered trademark of Maxim Integrated Products, Inc. Windows is a registered trademark and registered service mark of Microsoft Corporation. ModelGauge is a trademark of Maxim Integrated Products, Inc. Quick Start Required Equipment ● MAX173xxX/MAX173xxG EV kit ● Lithium battery pack of desired configuration ● Battery charger ● Load circuit ● USB cable ● PC with Windows 7 or newer windows operating system and USB port Procedure The EV kits are fully assembled and tested. Follow the steps below to install the EV kit software, make required hardware connections, and start operation of the kits. The EV kit software can run without hardware attached. It automatically locates the hardware when connections are made. After communication is established, follow the Detailed Description of Software section to configure the IC and start evaluation. 1) Visit www.maximintegrated.com/products/ MAX17303 under the Design Resources tab to download the latest version of the MAX173xx EV kit software. Save the EV kit software to a temporary folder and unpack the ZIP file. 2) Install the EV kit software on your computer by run- ning the MAX17301_03_11_13KEVKitGUISetup.msi program inside the temporary folder. The program files are copied, and icons are created in the Win- dows Start menu. The software requires the .NET Framework 4.5 or later. If you are connected to the Internet, Windows automatically updates the .NET framework as needed. FILE DECRIPTION MAX17300_03_10_13KEVKitGUISetup.msi Installs all EV kit files on your computer MAX173xx EV Kit Files Click here for production status of specific part numbers. |
Similar Part No. - MAX17313 |
|
Similar Description - MAX17313 |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |