MODEL: MXS

MXS SPECIFICATIONS

ES-1739 Rev.6 Page 2/3

http://www.m-system.co.jp/

INPUT SPECIFICATIONS

Measurement range: 0 – 360°

Minimum span: 60°

Input setting min. step: 0.1°

Input resistance: 1 MΩ min.

Rated input voltage: 90 V AC

Default setting: 270°

OUTPUT SPECIFICATIONS

■ DC Current: 0.0 – 20.0 mA DC

Operational range: 0.0 – 24.0 mA DC

Minimum increment: 0.1 mA

Default setting: 4.0 – 20.0 mA DC

■ DC Voltage

Code V1: -1.00 – +1.00 V DC

Operational range: -1.15 – +1.15 V DC

Minimum increment: 10 mV

Code V2: -10.0 – +10.0 V DC

Operational range: -11.5 – +11.5 V DC

Minimum increment: 100 mV

Note: Set to the 100 % output with a larger value than the

0 % output value.

Default setting:

Code V1: -1.00 – +1.00 V DC

Code V2: -10.0 – +10.0 V DC

INSTALLATION

Power consumption

•AC: Approx. 6 VA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 450 g (0.99 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 % or ±0.3°, whichever is greater.

Required conditions to ensure the accuracy: Input span

angle ≥ 60°; Output ≥ 20 % of selectable range

Display accuracy: Accuracy ±1 digit

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of max. span

Response time: ≤1 sec. (0 – 90 %) with no moving average

setting

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)