Advanced CMOS TTL Input – 74ACT11

Triple 3-Input AND gate with LSTTL compatible inputs in bare die form

Rev 1.0

11/03/19

The 74ACT11 is fabricated using an advanced CMOS

process combining LSTTL speed with CMOS low power

consumption while delivering high output drive. The

device contains x3 independent gates each performing

logic. The device directly accepts LSTTL or NMOS

inputs and suits use as a level converter for interfacing

TTL or NMOS outputs to high speed CMOS inputs. All

inputs are protected against ESD and excess voltage

transients.

Description

Features:



Inputs directly accept TTL / NMOS



Outputs directly interface CMOS, NMOS and TTL



Outputs Sink/Source 24mA



Low input current: 1µA



High noise immunity



Functionally compatible with bipolar 74LS/ALS11.



Full military temperature Range

Ordering Information

The following part suffixes apply:



No suffix - MIL-STD-883 /2010B Visual Inspection

For High Reliability versions of this product please see

Die Dimensions in µm (mils)

1130 (45)

Die Size (Unsawn)

1130 x 1070

45 x 42

µm

mils

Minimum Bond Pad Size

108 x 108

4.25 x 4.25

µm

mils

Die Thickness

350 (±20)

13.78 (±0.79)

µm

mils

Top Metal Composition

Al 1%Si 1.1µm

Back Metal Composition

N/A – Bare Si

54ACT11

Supply Formats:

Mechanical Specification



Default – Die in Waffle Pack (400 per tray capacity)



Sawn Wafer on Tape – On request



Unsawn Wafer – On request



Die Thickness <> 350µm(14 Mils) – On request



Assembled into Ceramic Package – On request

Page 1 of 5

www.siliconsupplies.com