MODEL: 18BXC

http://www.m-system.co.jp/

18BXC SPECIFICATIONS

ES-1892 Rev.13 Page 1/5

Rack-mounted DCS Signal Conditioners 18-RACK

STANDARD RACK

Functions & Features

• Standard 19" rack for 18-RACK signal conditioners

• Line power access at the terminal card, supplied via the

rear rack bus

• Direct interface to various DCS with the rack side

connector

MODEL: 18BXC–1[1][2]

ORDERING INFORMATION

• Code number: 18BXC-1[1][2]

Specify a code from below for [1] and [2]

(e.g. 18BXC-11/W)

FUNCTION

1: Power distribution

[1] CONNECTOR

1: Fujitsu FCN type I/O connector

2: Yokogawa VMx / PM1 card use

3: Yokogawa MAC2 / PAC card use

H1: Hitachi DCS EX connector

H2: Hitachi DCS EX-CDL cable connector

E5: Toshiba DCS VAIMX1 card use

E6: Toshiba DCS VAOPX1 card use

K1: Yamatake DCS AI connector

K2: Yamatake DCS AO connector

K5: Yamatake DCS PI connector

V1: Shimadzu DCS connector

M-System guarantees the connecting section.

[2] OPTIONS

Mounting Bracket

blank: Rack mounting, standard

/W: Surface mounting

RELATED PRODUCTS

• Blank filler plate (model: P-181)

• Connector terminal block (model: CNT)

• Special cable with 40-pin connector (model: FCN)

GENERAL SPECIFICATIONS

Construction: Metal plates assembly

Coating: Colored Zn-Cr

Capacity: 16 positions

Connection

Power input: M4 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated brass

INSTALLATION

Power input

•DC: Operating voltage range 24 V DC ±10 %, 2.5 A

minimum (ripple 10 % p-p max.)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: JIS or EIA standard rack or surface

Weight: 1.7 kg (3.7 lbs)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

(I/O connector to power to FG)

Dielectric strength:

500 V AC @ 1 minute (I/O connector to power)

1000 V AC @ 1 minute (I/O connector or power to FG)