MODEL: MD7PA

MD7PA SPECIFICATIONS

ES-8056 Rev.11 Page 3/3

https://www.m-system.co.jp/

Protected

Devices

(Nodes)

M-RESTER

G

G

G

G

G

G

G

Protected

Devices

(Nodes)

When the distance between nodes are relatively long (e.g. grouped and separated by cabinets),

install the MD7PA by each group of devices. Insert the MD7PA at the surge side of the network.

For detailed information on the network, refer to that provided by PROFIBUS International.

*1. Fieldbus devices complying with IEC 61158-2 operate by a supply voltage between

9V and 32V DC.

Take the MD7PA’s internal series resistance into consideration when determining the

cable distance if there is a large current flow on the bus line.

Crossover Wire

Crossover Wire

*1

M-RESTER

Specifications are subject to change without notice.