MH 02-L

2

Germany: +49 621 776 1111

Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: +1 330 486 0001

Singapore: +65 6779 9091

www.pepperl-fuchs.com

fa-info@us.pepperl-fuchs.com

fa-info@sg.pepperl-fuchs.com

fa-info@de.pepperl-fuchs.com

Mounting aid

Installation note:

• Loosen the connection between the profile section and the base by unscrewing the internal hexagon screws (DIN 7984)

• Carefully remove the retaining piece from the base and rotate it through approx. 90°

• Put the mounting accessories on the C-Schiene at desired position

• Rotate the retaining piece back, lightly tighten the internal hexagon head screws

• Pre-adjust the profile section using the elongated hole

• Tighten the internal hexagon head screws

• Insert the M5 slotted cylindrical head screws provided in the sensor base and fix the sliding blocks to them and tighten with

approx. 3 turns of the screws

• Slide the loosely attached sliding blocks into the profile section

• Position the sensor and fasten the screws

Supplied accessories

Mounting bracket MH 02-L, consisting of

• 1 profile rail (70 mm) with elongated hole pre-mounted on a base for direct installation on the C-rail according to EN 500024

(DIN 43662)

• 2 sliding blocks (M5) for sensor mounting

• 2 slotted cylindrical head screws (M5 x 35/DIN 912) for sensor mounting

Mounting

Scope of Delivery

Application