MODEL: R5-YS

R5-YS SPECIFICATIONS

ES-6120 Rev.9 Page 1/3

http://www.m-system.co.jp/

Remote I/O R5 Series

4 - 20 mA OUTPUT MODULE

96.5

(3.80)

18 (.71)

90

(3.54)

mm (inch)

MODEL: R5-YS[1][2]/A[3]

ORDERING INFORMATION

• Code number: R5-YS[1][2]/A[3]

Specify a code from below for each [1] through [3].

(e.g. R5-YS1W/A/H/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] NO. OF CHANNELS

1: 1

2: 2

[2] COMMUNICATION MODE

S: Single

W: Dual

OUTPUT HOLD

/A: With output hold setting switch

[3] OPTIONS (multiple selections)

Load Resistance

blank: ≤ 300 Ω

/H: ≤ 600Ω (available only for 1-channel output type)

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R5-BS)

Output: Euro type connector terminal

stripped length 7 mm)

Internal power: Via the base (model: R5-BS)

Isolation: Output 1 to output 2 to internal bus or internal

power

Output hold: Setting of output hold or off for communication

error with side DIP SW

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

OUTPUT SPECIFICATIONS

Output range: 4 – 20 mA DC

Load resistance: 300 Ω max. (600 Ω max. with Option /H)

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R5-BS)

Weight: 100 g (3.53 oz)

PERFORMANCE

Conversion accuracy: ±0.1 %

Data range: 0 – 10000 of the output range

Data allocation: 1 (2 for 2-channel type)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

With Option /H, ±0.02 %/°C (±0.01 %/°F)

Response time: ≤ 0.2 sec. (0 – 90 %)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(output 1 to output 2 to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581