ISO6720 datasheet(21/43 Pages) TI

21 / 43 page

9 Application and Implementation

Note

Information in the following applications sections is not part of the TI component specification, and

TI does not warrant the accuracy or completeness. TI’s customers are responsible for determining

suitability of components for their purposes. Customers should validate and test their design

implementation to confirm system functionality.

9.1 Application Information

The ISO672xB devices are high-performance, dual-channel digital isolators. The devices use single-ended

CMOS-logic switching technology. The supply voltage range is from 1.71 V to 5.5 V for both supplies, VCC1

and VCC2. Since an isolation barrier separates the two sides, each side can be sourced independently with any

voltage within recommended operating conditions. As an example, it is possible to supply ISO672xB VCC1 with

3.3 V (which is within 1.71 V to 1.89 V and 2.25 V to 5 V) and VCC2 with 5 V (which is also within 1.71 V to

1.89 V and 2.25 V to 5 V). You can use the digital isolator as a logic-level translator in addition to providing

isolation. When designing with digital isolators, keep in mind that because of the single-ended design structure,

digital isolators do not conform to any specific interface standard and are only intended for isolating single-ended

CMOS or TTL digital signal lines. The isolator is typically placed between the data controller (that is, MCU or

FPGA), and a data converter or a line transceiver, regardless of the interface type or standard.

www.ti.com

ISO6720, ISO6721

SLLSFJ0C – JANUARY 2020 – REVISED MAY 2021

Submit Document Feedback

Product Folder Links: ISO6720 ISO6721

ISO6720 Datasheet(PDF) 21 Page - Texas Instruments