MODEL: R5-BS

R5-BS SPECIFICATIONS

ES-6106 Rev.14 Page 1/4

http://www.m-system.co.jp/

Remote I/O R5 Series

INSTALLATION BASE

MODEL: R5–BS[1][2]

ORDERING INFORMATION

• Code number: R5-BS[1][2]

Specify a code from below for each of [1] and [2].

(e.g. R5-BS16/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] I/O CAPACITY

04: 4 slots

05: 5 slots (single communication mode)

08: 8 slots

09: 9 slots (single communication mode)

16: 16 slots

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

Only solder side of the main PWB is coated.

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Capacity

Power: 1 module; 2 modules with Extender Base for Power

Supply Module (Model: R5-EX1)

Network interface: 2 modules

(Only one [1] network module for R5-BS05 and BS09;

Select R5-BS04, BS08 or BS16 for dual-redundant

network communications.)

I/O:

R5-BS04: 4 modules

R5-BS05: 5 modules

R5-BS08: 8 modules

R5-BS09: 9 modules

R5-BS16: 16 modules

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Surface or DIN rail

Weight (No remote I/O module mounted)

R5-BS04, BS05: 120 g (0.26 lb)

R5-BS08, BS09: 170 g (0.37 lb)

R5-BS16: 280 g (0.62 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

(internal power or internal bus to ground)

Dielectric strength: 2000 V AC @ 1 minute

(internal power or internal bus to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581